J1850/VPW transceiver with supply control function

DESCRIPTION The AU5783 is a line transceiver being primarily intended for in-vehicle multiplex applications. It provides interfacing between a J1850 link controller and the physical bus wire. The device supports the SAE/J1850 VPWM standard with a nominal bus speed of 10.4 kbit/s. For data upload

文件：115.89 Kbytes 页数：14 Pages

PHI

PHI

J1850/VPW transceiver with supply control function

DESCRIPTION The AU5783 is a line transceiver being primarily intended for in-vehicle multiplex applications. It provides interfacing between a J1850 link controller and the physical bus wire. The device supports the SAE/J1850 VPWM standard with a nominal bus speed of 10.4 kbit/s. For data upload

文件：115.89 Kbytes 页数：14 Pages

PHI

PHI

J1850/VPW transceiver with supply control function

DESCRIPTION The AU5783 is a line transceiver being primarily intended for in-vehicle multiplex applications. It provides interfacing between a J1850 link controller and the physical bus wire. The device supports the SAE/J1850 VPWM standard with a nominal bus speed of 10.4 kbit/s. For data upload

文件：115.89 Kbytes 页数：14 Pages

PHI

PHI

J1850/VPW transceiver with supply control function

DESCRIPTION\nThe AU5783 is a line transceiver being primarily intended for in-vehicle multiplex applications. It provides interfacing between a J1850 link controller and the physical bus wire. The device supports the SAE/J1850 VPWM standard with a nominal bus speed of 10.4 kbit/s. For data upload an • Supports SAE/J1850 VPW standard for in-vehicle class B multiplexing\n• Bus speed 10.4 kbit/s nominal\n• Drive capability 32 bus nodes\n• Low RFI due to output waveshape function\n• Direct battery operation with protection against +40V load dump and 8 kV ESD\n• Bus terminals proof against automotiv;

恩XP