ATWILC3000-IC中文资料IEEE 802.11 b/g/n Link Controller数据手册Microchip规格书

描述 Description

ATWILC3000 is a single chip IEEE 802.11 b/g/n RF/Baseband/MAC link controller and Bluetooth 5 IC. The ATWILC3000 connects to Microchip AVR/SMART MCUs, SMART MPUs, FPGAs and other processors with minimal resource requirements and a simple SPI/SDIO-to-Wi-Fi and UART-to-Bluetooth interfaces.The ATWILC3000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP. The ATWILC3000 features fully integrated Power Amplifier, LNA, Switch and Power Management. Implemented in low-power CMOS technology, the ATWILC3000 offers very low power consumption while simultaneously providing high performance and minimal bill of materials.The ATWILC3000 utilizes highly optimized 802.11-Bluetooth coexistence protocols. The only external clock sources needed for the ATWILC3000 is a high-speed crystal or oscillator and a 32.768 kHz clock for sleep operation.The ATWILC3000 can be used in Linux, RTOS or Baremetal Environments.The ATWILC3000 uses the same driver as the ATWILC1000. The ATWILC1000 Linux driver development is now an integrated development under the Linux4sam.org project.The current stable release can be found at github.com/linux4sam/linux-at91/tree/master/drivers/staging/wilc1000The current development branch can be found at github.com/linux4sam/linux-at91/tree/linux-5.10-at91/drivers/net/wireless/microchipThe WILC demo, serial bridge and firmware are hosted at github.com/linux4wilcMicrochip's complimentary and confidential Wireless Check online design review service is available for customers who have selected our products for their application design-in*.*The online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.Available in a fully-certified modules with u.FL connector or PCB antenna.

特性 Features

IEEE 802.11 b/g/n 20MHz (1x1) solution
Single spatial stream in 2.4 GHz ISM band
Integrated PA and T/R Switch
Superior Sensitivity and Range via advanced PHY signal processing
Wi-Fi Direct and Soft-AP support
Supports IEEE 802.11 WEP, WPA, WPA2 Security
On-chip memory management engine to reduce host load
SPI, SDIO, I2C, and UART host interfaces
Operating temperature range of -40 °C to +85 °C
Bluetooth Low Energy 5.0
Adaptive Frequency Hopping
HCI (Host Control Interface) via high speed UART
Integrated PA and T/R Switch
Superior Sensitivity and Range
UART host and audio interfaces