ATSAMDA1G15B中文资料SAM 32-bit MCU数据手册Microchip规格书

描述 Description

The SAM DA1 ARM® Cortex®-M0+ -based microcontrollers are operating at 48MHz (45DMIPS). The ATSAMDA1G15B provides 32KB Flash, 4kB SRAM and 1KB RWW Flash. The connectivity peripheral set consists of 6 serial communication modules (SERCOM) that each can be configured to act as a USART, UART, SPI and I2C. Additional connectivity options are provided by the on-chip one channel Inter-IC sound interface (I2S) and the full-speed USB 2.0 embedded host and device.Supported by MPLAB X IDE and MPLAB Harmony.Functional SafetyThis device supports the ISO 26262 (ASIL B) functional safety standard.  ·   The Functional Safety Manual, FMEDA and information on the Diagnostic Software are available under NDA through the request form on the 32-bit Microcontrollers Functional Safety  web page.·  Learn more about  32-bit MCUs with Functional Safety capabilities including device hardware and certified software libraries.

特性 Features

• ARM Cortex-M0+ CPU running at up to 48MHz
• Micro trace buffer
• 1KB Read-While-Write (RWW) Flash section
• Power-on reset (POR) and brown-out detection (BOD)
• fractional digital phase locked loop (FDPLL96M)
• 16 external interrupts
• Two-pin serial wire debug (SWD) programming, test and debugging interface
• SleepWalking peripherals
• 12-channel event system
• One 8-bit TC with compare/capture channels
• Up to four compare channels with optional complementary output
• Deterministic fault protection, fast decay and configurable dead-time between complementary output
• 32-bit real time counter (RTC) with clock/calendar function
• CRC-32 generator
• Flexible end-point configuration and management with dedicated DMA channels
• Crystal-less operation in device mode
• I2C up to 3.4MHz
• LIN Client
• Differential and single-ended input
• Automatic offset and gain error compensation
• 10-bit, 350ksps digital-to-analog converter (DAC)
• Up to 256-channel capacitive touch and proximity sensing
• 48-pin TQFP, QFN
• –40 to +105°C