ATA663431数据手册集成电路（IC）的驱动器接收器收发器规格书PDF

描述 Description

The Microchip'sATA663431/54 system basis chip is a fullyintegrated LIN transceiver, designed according to the LIN specification 2.0,2.1, 2.2, 2.2A and SAEJ2602-2, with a low-drop voltage regulator with 3.3V/85mA(ATA663431) or 5V/85mA (ATA663454). Additional the device includes a Watchdog, a high-side switch and 2 high-voltage wake inputs: one positive edge sensitive, one negative edge sensitive. This combination makes it possible to develop simple but powerful slave nodes inLIN bus systems. Improved slope control at the LIN driver ensures secure datacommunication up to 20Kbaud. Sleep mode and silent mode guarantee minimizedcurrent consumption even in the case of a floating or a shorted LIN bus. Thevoltage regulator is a fully integrated low-drop regulator working down to asupply voltage of 2.3V with best-in-class current consumption in linear mode(2V
The device is available in DFN16 package with wettableflanks to enable optical soldering inspection. The footprint is compatible withthe ATA663231/54 LIN system basis chip which enables customers to producemodules with/without watchdog by assembling the LIN SBC with watchdog(ATA663431/54) or the ATA663231/54 without watchdog.

特性 Features

• Supply Voltage up to 40V
• Operating Voltage VVS= 5V to 28V
• Very low supply current in sleep mode:typ. 10µA
• Linear Low-Drop Voltage Regulator with 85 mA Current Capability @ VVCC=5.0V, ±2%
• VCC Undervoltage Detection with Open Drain Reset Output (NRES, 4 ms reset time)
• Voltage Regulator is Short Circuit and Overtemperature Protected
• Adjustable Watchdog Time via External Resistor
• Negative Trigger Input for Watchdog
• Limp Home Watchdog Failure Output
• LIN Physical Layer according to LIN 2.0, 2.1, 2.2, 2.2A, ISO 17987-4 and SAEJ2602-2
• Bus Pin is Overtemperature and Short Circuit Protected versus GND and Battery
• High-Side Switch
• Wake-Up Capability via LIN Bus (100 μs dominant), WKin pin and CL15 pin
• Wake-up Source Recognition
• TXD Time-out Timer
• Advanced EMC and ESD Performance
• Fulfills the OEM “Hardware Requirements for LIN in Automotive Applications Rev.1.3”
• Interference and Damage Protection According to ISO7637
• Qualified According to AEC-Q100
• Package: 16-lead 3 x 5.5 mm VDFN with Wettable Flanks (Moisture Sensitivity Level 1)
Built-In Safety Features
• Power-on Reset
• Voltage Monitoring (VCC, VS)
• Window Watchdog
• TXD Dominant Timeout

简介

ATA663431属于集成电路（IC）的驱动器接收器收发器。由制造生产的ATA663431驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。