AT83C5122中文资料爱特梅尔数据手册PDF规格书

Product Description

AT8xC5122/23 products are high-performance CMOS derivatives of the 80C51 8-bit microcontrollers designed for USB smart card reader applications.

Features

• Clock Controller

– 80C51 core with 6 clocks per instruction

– 8 MHz On-Chip Oscillator

– PLL for generating clock to supply CPU core, USB and Smart Card Interfaces

– Programmable CPU clock from 500 KHz / X1 to 48 MHz / X1

• Reset Controller

– Power On Reset (POR) feature avoiding an external reset capacitor

– Power Fail Detector (PFD)

–Watch-Dog Timer

• Power Management

– Two power saving modes : Idle and Power Down

– Four Power Down Wake-up Sources : Smart Card Detection, Keyboard Interrupt, USB Resume, External Interrupt

– Input Voltage Range : 3.0V - 5.5V

– Core’s Power Consumption (Without Smart Card and USB) :

•30 mA Maximum Operating Current @ 48 MHz / X1

•200 μA Maximum Power-down Current @ 5.5V

• Interrupt Controller

– up to 9 interrupt sources

– up to 4 Level Priority

• Memory Controller

– Internal Program memory :

•up to 32KB of Flash or CRAM or ROM for AT8xC5122 or ROM for AT83R5122

•up to 30KB of ROM for AT83C5123

– Internal Data Memory : 768 bytes including 256 bytes of data and 512 bytes of XRAM

– Optional : internal data E2PROM 512 bytes

• Two 16-bit Timer/Counters

• USB 2.0 Full Speed Interface

–48 MHz DPLL

– On-Chip 3.3V USB voltage regulator and transceivers

– Software detach feature

– 7 endpoints programmable with In or out directions and ISO, Bulk or Interrupt Transfers :

•Endpoint 0: 32 Bytes Bidirectionnal FIFO for Control transfers

•Endpoints 1,2,3: 8 bytes FIFO

•Endpoints 4,5: 64 Bytes FIFO

•Endpoint 6: 2*64 bytes FIFO with Pin-Pong feature

• ISO 7816 UART Interface Fully Compliant with EMV, GIE-CB and WHQL Standards

– Programmable ISO clock from 1 MHz to 4.8 MHz

– Card insertion/removal detection with automatic deactivation sequence

– Programmable Baud Rate Generator from 372 to 11.625 clock pulses

– Synchronous/Asynchronous Protocols T=0 and T=1 with Direct or Inverse Convention

– Automatic character repetition on parity errors

– 32 Bit Waiting Time Counter

– 16 Bit Guard Time Counter

– Internal Step Up/Down Converter with Programmable Voltage Output:

•VCC = 4.0V to 5.5V, 1.8V-30 mA, 3V-60 mA and 5V-60 mA

•VCC = 3.0V, 1.8V-30 mA, 3V-30 mA and 5V-30 mA

– Current overload protection

– 6 kV ESD (MIL/STD 833 Class 3) protection on whole Smart Card Interface

• Alternate Smart Card Interface with CLK, IO and RST

• UART Interface with Integrated Baud Rate Generator (BRG)

• Keyboard interface with up to 20x8 matrix management capability

• Master/Slave SPI Interface

• Four 8 bit Ports, one 6 bit port, one 3-bit port

– Up to Seven LED outputs with 3 level programmable current source : 2, 4 and 10 mA

– Two General Purpose I/O programmable as external interrupts

– Up to 8 input lines programmable as interrupts

– Up to 30 output lines