QTouch??11-key Sensor IC

Introduction The AT42QT1110 (QT1110) is a digital burst mode charge-transfer (QT™) capacitive sensor driver designed for any touch-key applications. The keys can be constructed in different shapes and sizes. Refer to the Touch Sensors Design Guide and Application Note QTAN0002, Secrets of a Succ

文件：688.41 Kbytes 页数：48 Pages

ATMEL

爱特梅尔

Device configuration can be stored in EEPROM

Introduction The AT42QT1110 (QT1110) is a digital burst mode charge-transfer (QT™) capacitive sensor driver designed for any touch-key applications. The keys can be constructed in different shapes and sizes. Refer to the Touch Sensors Design Guide and Application Note QTAN0002, Secrets of a Succ

文件：698.3 Kbytes 页数：48 Pages

ATMEL

爱特梅尔

Accessories Hardware

[NKK Switches] Hardware Threading Many hardware pieces are available in both metric and inch threading, and in such cases M (metric) and H (inch) are noted in the descriptions. The customer must select threading by placing an M or H after the basic AT part number. If the hardware is available

文件：3.43102 Mbytes 页数：34 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

PCMCIA Card Memory Interface Circuit with 256 Bytes of Internal Attribute Memory EEPROM

Description The AT43101 is a low power, high integration PCMCIA interface chip set for memory cards. It provides a complete PCMCIA PC Card Standard Release 2.1 compliant interface with no other support devices. Two AT43101’s are used on each memory card. Features • Supports PCMCIA PC Card Stand

文件：103.15 Kbytes 页数：14 Pages

ATMEL

爱特梅尔

Accessories Hardware

[NKK Switches] Hardware Threading Many hardware pieces are available in both metric and inch threading, and in such cases M (metric) and H (inch) are noted in the descriptions. The customer must select threading by placing an M or H after the basic AT part number. If the hardware is available

文件：3.43102 Mbytes 页数：34 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

Accessories Hardware

[NKK Switches] Hardware Threading Many hardware pieces are available in both metric and inch threading, and in such cases M (metric) and H (inch) are noted in the descriptions. The customer must select threading by placing an M or H after the basic AT part number. If the hardware is available

文件：3.43102 Mbytes 页数：34 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

USB HUB CONTROLLER

Description The AT43301 is a 5-port USB hub chip supporting one upstream and four down stream ports. The AT43301 connects to an upstream hub or host/root hub via Port0, while the other ports connect to external downstream USB devices. The hub re-trans mits the USB differential signal between Po

文件：16.51 Kbytes 页数：2 Pages

ATMEL

爱特梅尔

USB Hub

Description The AT43310 is a fully compliant USB hub chip with 5 ports, one upstream port and four full/low-speed downstream ports. The AT43310 can be used as a stand alone or can provide a simple and quick method of adding USB ports to an existing device. Features • Bus Powered Hub Controller

文件：247.53 Kbytes 页数：25 Pages

ATMEL

爱特梅尔

USB Hub

Description The AT43311 is a fully compliant USB hub chip with 5 ports, one upstream port and four full/low-speed downstream ports. The AT43311 can be used as a stand alone or can provide a simple and quick method of adding USB ports to an existing device. Features • Self-Powered Hub with Bus P

文件：136.5 Kbytes 页数：24 Pages

ATMEL

爱特梅尔

Self- and Bus- Powered USB Hub Controller

Description The AT43312 is a 5 port USB hub chip supporting one upstream and four downstream ports. The AT43312 connects to an upstream hub or Host/Root Hub via Port0 and the other ports connect to external downstream USB devices. The hub re-transmits the USB differential signal between Port0 and

文件：157.98 Kbytes 页数：21 Pages

ATMEL

爱特梅尔