AT18F080-30XU集成电路（IC）的用于FPGA的配置PROM规格书PDF中文资料

Description

The AT18F Series of JTAG In-System Programmable Configuration PROMs (Configurators) provide an easy-to-use, cost-effective configuration memory for Field Programmable Gate Arrays. The AT18F Series device is packaged in a 20-lead TSSOP. The AT18F Series Configurator uses a simple serial-access procedure to

configure one or more FPGA devices.

The AT18F Series Configurators can be programmed with Atmel or industry-standard, third-party, stand-alone programmers such as BP, Data I/O, Hi-Lo, etc.

Features

• Very Low-cost Configuration Memory

• Programmable 1,048,576 x 1, 2,097,152 x 1, 4,194,304 x 1 and 7,340,032 x 1-bit Serial Memories Designed to Store Configuration Programs for Field Programmable Gate Arrays (FPGAs)

• 1.8V, 2.5V, and 3.3V I/O

• 3.3V Supply Voltage

• Program Support using an Atmel Programmer or Industry-standard Third Party Programmers

• In-System Programmable (ISP) via JTAG Interface (IEEE 1532)

• IEEE 1149.1 Boundary-scan Testability

• Simple Interface to SRAM FPGAs

• Pin Compatible with Xilinx® XCFxxS Series Platform Flash PROM to Configure Xilinx Spartan® and Virtex® FPGAs

• Cascadable Read-back to Support Additional Configurations or Higher-density FPGAs

• Low-power CMOS FLASH Process

• Available in 20-lead TSSOP Package

• Low-power Standby Mode

• Fast Serial Download Speeds up to 33 MHz

• Endurance: 100,000 Write Cycles Typical

• Green (Pb/Halide-free/RoHS Compliant) Package

• Functionally-compatible with Existing AT17 Series Configuration Memories to Configure Atmel AT40KAL Series FPGAs