Description

M/A-COM’s AT-232-PIN is a GaAs FET 4-bit digital attenuator with a 2 dB minimum step size and 30 dB total attenuation. This attenuator is in a hermetically sealed ceramic 16-lead surface mount package. The AT-232-PIN is ideally suited for use where accuracy, fast switching, very low power consumption and low intermodulation products are required. Typical applications include dynamic range setting in precision receiver circuits and other gain/leveling control circuits. Environmental screening is available. Contact the factory for information.

Features

• Attenuation: 2 dB steps to 30 dB

• Temperature Stability: ± 0.18 dB from –55°C to +85°C Typical

• Low DC Power Consumption

• Hermetic Surface Mount Package

• Fast Switching Speed, 12 ns Typical

• 50 Ohm Nominal Impedance

• Lead-Free CR-6 Package

• 260°C Reflow Compatible

• RoHS Compliant

AT-232-PIN属于RF/IF，射频/中频和 RFID > 衰减器。Tyco Electronics制造生产的AT-232-PIN衰减器衰减器旨在降低信号功率，同时尽量减少其对波形的影响。衰减值的范围为 0 dB 至 69 dB，频率范围为 0 至 86 GHz。