Low Power, 5V/3.3V, µP Reset, Active LOW, Open-Drain Output

General Description\nThe ASM1233D-L/1233D/1233M are voltage supervisors with low-power, 5/3.3V µP Reset, with an active LOW, open-drain output. Maximum supply current over temperature is 15µA for 3.3V devices and 20µA for 5V devices.Key • Low Supply Current\n• 15µA maximum (<=3.6V), 20µA maximum (5.5V)\n• Automatically restarts a microprocessor after power failure\n• 350ms reset delay after VCC returns to an in-tolerance condition\n• Active LOW power-up reset, 5kΩ internal pull-up\n• Precision temperature-compensated voltage refere;

ONSEMI

安森美半导体

Low Power, 5V/3.3V, 關P Reset, Active LOW, Open-Drain Output

文件：258.779 Kbytes 页数：11 Pages

PULSECORE

安森美

5V EconoReset

DESCRIPTION The DS1233D EconoReset uses a precision temperature-compensated reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. When V

文件：116.34 Kbytes 页数：5 Pages

Dallas

3.3V EconoReset

DESCRIPTION The DS1233A EconoReset monitors two vital conditionsfor a microprocessor: power supply and external override. A precision temperature-compensated reference and comparator circuit are used to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected

文件：121.09 Kbytes 页数：5 Pages

Dallas

5V EconoReset

DESCRIPTION The DS1832 3.3-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, software execution, and external override. First, a precision temperature-compensated reference and comparator circuit monitor the status of VCC. When an out-of-tolerance condition occ

文件：50.49 Kbytes 页数：5 Pages

Dallas