ASL4500SHN数据手册恩XP中文资料规格书

描述 Description

The ASL4500SHN is a highly integrated and flexible four-phase DC-to-DC boost converterIC. It has an SPI interface allowing control & diagnostic communication with anexternal microcontroller.
It is designed primarily for use in automotive LED lighting applications and provides anoptimized supply voltage for ASLx41xSHN Multi-channel LED Buck Driver.
The ASL4500SHN has a fixed frequency peak current mode control with parabolic/non-linearslope compensation. It can operate with input voltages from 5.5 V to 40 V. It can beconfigured via SPI for output voltages of up to 80 V, to power the LED buck driverIC.
The ASL4500SHN is a four-phase converter which can have two independent outputs. Thedriver has the flexibility to be configured, via the SPI interface, as a single outputconverter, or with multiple combinations of number of outputs and phases.
The ASL4500SHN boost converter can drive up to four external low-side N channel MOSFETsfrom an internally regulated adjustable supply. It can be used to drive either logic orstandard level MOSFETs.
The integrated SPI interface also allows for programming the supply under/over voltagerange, output voltage range and DC-to-DC switching frequency. It enables theoptimization of external components and flexibility for EMC design. This interface canalso be used to provide diagnostic information such as the driver temperature.
Additional features include protection against load dump transient voltages of up to 60 Vand thermal shutdown when the junction temperature of the ASL4500SHN exceeds +175°C.
The device is housed in a very small HVQFN32 pin package and is designed to meet thestringent requirements of automotive applications. It is fully AEC Q100 grade 1qualified. It operates over the -40 °C to +125 °C ambient automotive temperaturerange.

特性 Features

• The ASL4500SHN is an automotive grade product that is AEC-Q100 grade 1qualified
• Operating ambient temperature range of -40 °C to +125 °C
• Wide operating input voltage range from +5.5 V to +40 V
• Output voltage programmable via SPI interface
• Multi-Phase Operation for higher power
• Up to four phases per output
• Up to two flexible output voltages with 3 % accuracy programmable via SPI
• Both output voltages can be controlled independently
• Fixed Frequency Operation via built-in oscillator
• Slope Compensation tracks the frequency and output voltage
• Programmable control loop compensation
• Fast high-efficiency FET switching
• Programmable Internal Gate Driver Voltage Regulator
• Gate switching is halted when overvoltage on output is detected
• Supports both Logic Level and Standard Level FETs
• Low Electro Magnetic Emission (EME) and high Electro Magnetic Immunity (EMI)
• Output Voltage Monitoring
• Supply voltage measurement
• Control Signal to Enable the Device
• Read Back programmed voltage and frequency range via SPI
• Junction Temperature monitoring via SPI
• Small Package outline HVQFN32
• Low Quiescent current <5 μA at 25 °C when EN = 0

应用 Application

汽车LED照明 日间行车灯
示宽灯或泊车灯
近光照明
远光照明
矩阵光束
自适应远光照明
转向指示灯
雾灯
转向灯
倒车灯
有关数据手册和更多信息，请联系当地销售部门