AP3981B数据手册开发板套件编程器的评估演示板及套件规格书PDF

描述 Description

The AP3981B is a high performance power switcher integrated with a primary side regulation controller and an N-channel power MOSFET. It can be used for battery charger and adaptor applications, accurate Constant Voltage (CV) and Constant Current (CC) can be achieved without an opto-coupler and secondary control circuitry.

The AP3981B operates in Pulse Frequency Modulation (PFM) mode and peak current Amplitude Modulation (AM) mode to form a fine tune frequency curve within the whole power range. Therefore, the AP3981B can achieve high average efficiency and improve audible noise.

The AP3981B provides comprehensive protections without additional circuitry. It contains VCC over voltage protection, output over voltage protection, output under voltage protection, output short circuit protection, cycle-by-cycle current limit, open loop protection, and internal OTP, etc.

The AP3981B is available in SO-7 package.

特性 Features

•Primary-Side Control for Eliminating Opto-Coupler
•Built-In 650V Power MOSFET
•75mW No-Load Input Power
•Flyback Topology in DCM Operation
•External Adjustable Line Compensation for CC
•Fixed Internal Cable Compensation
•Multiple Segment AM/PFM Control Mode to Improve Audio Noise and Efficiency
•Frequency Jitter to Improve System EMI
•Capacitive Load Start-Up Capability
•Valley-On for the Higher Efficiency and Better EMI Behavior
•Multiple Protections:
•Secondary-Side Over Voltage Protection (SOVP)
•Secondary-Side Under Voltage Protection (SUVP)
•Output Short Circuit Protection (SCP)
•Transformer Saturation Protection (TSP) via Primary Peak
•Current Limitation
•Internal Over Temperature Protection (OTP)
•SO-7 Package
•The Recommended Output Power is up to 7.5W
•Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
•Halogen and Antimony Free. “Green” Device (Note 3)

应用 Application

• Routers

• Set-Top Box (STB) Power Supply

• Network Adaptors