ANX7493-AA中文资料硅谷数模数据手册PDF规格书

特性 Features

• Built-in redrivers

− Integrated re-driver for USB3.2 up to Gen 2 @ 10Gbps

− Integrated re-drivers for DisplayPort up to UHBR10 @ 10Gbps.

− Supports both host (source) and device (sink) applications in USB-C subsystems with DisplayPort Alternate Mode

− Loss compensation to recover up to 12dB channel loss

• Work mode and CTLE configurations

− Work mode set by I2C registers

− Datapath orientation and direction set by I2C registers or GPIO

− CTLE configurations set by I2C registers or GPIO

• Serial and debug interfaces

− I2C Slave interface, up to 1MHz, for mux and redriver configuration

• Industry standard compatibility

− USB3.2 specification

− DisplayPort 2.0 specification

− USB Type-C r2.0 specification

• Low-power design

− AUX CH commands snooping for power saving in DP mode

− USB high speed and LFPS signals detection for power saving in USB mode

− Analog power supply at 1.8V

− I/O power supply at 1.8V − Integrated Core power supply at 1.2V

• Package

− QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch

• Commercial temperature range of 0C to 70C

Applications

Notebooks, desktops, gaming PCs, workstations, servers, 2-in-1 PCs, active cables and accessories