ANX2433中文资料ANX2433 FullHD eDP1.4b PSR1 TCON数据手册Analogix规格书

描述 Description

ANX2433 is a low power consumption two-lane embedded DisplayPort™ (eDP) 1.4b compliant TCON with PSR  function. It features intermediate link rates (that is, 1.62 (RBR), 2.16, 2.43, and 2.70(HBR)) and reduced voltage  swing. ANX2433 supports Media Buffer Optimization (MBO). It also supports in-cell touch and output to the  CEDS Source Driver Interface.
The PSR feature enables system-level power savings when the displayed image remains static for multiple  display frames. With this feature enabled and the same image displayed spanning across multiple frames, the  ANX2433 stores the image in its DRAM and displays this image from its internal frame buffer, while the eDP  main link may be turned off. Other source functions are also powered down for further power savings.

特性 Features

Other Features
 ·eDP receiver·Integrated high-speed DP-Rx compliant with  DisplayPort standard eDP v1.4b
·Up to 2 lanes @2.7Gbps, 2.16Gbps, 2.43Gbps  and 1.62Gbps
·Normal/Fast/No link training
·Support PSR1 function by MCP(multi chip  package) DRAM die
·Supports DRRS/NvDPS/SDRRS functions
·Supports MBO

·CEDS protocol, which supports the following:·Up to 12-channels
·CEDS transmitter up to 2.0Gbps configuration
·Various swap modes: inter-port swap, intra-  port swap, p/n swap, RGB swap, odd/even  pixel swap, etc.
·Scan direction swap
·Supports VBPR function
·Supports Z-inversion(column inversion), and N-  line inversion
·Programmable charger share control including  disable

·System IO functions with non-standard  applications·EDID access through AUX channel
·EDID and configuration content check-sum  support
·On-chip filtered reset
·EEPROM shared for EDID and configuration  power requirements
·On-chip SSCG (max. +/-1% with 0.25% step,  10/20/30/40 kHz, center spreading)

·TCON functions supported·HD(1366x768), HD+(1600x900),  FHD(1920x1080), 1920x1280
·eDP TCON color depth: 18/24bpp input,  18/24bpp output
·Gate D-IC/GIP timing through GPIO
·Power-up gate output masking to avoid DC/DC  over-loading
·Programmable Fail Safe mode control
·Configurable BIST pattern
·10-bit gamma correction table for each color
·FRC and various FRC pattern configurations
·PWM generator, PWM pass-through, and PWM  product modes
·DELL DBC
·Adaptive sync, Direct drive G-sync support

·No external crystal required
·Reduced WWAN interference (SSC on LC clock and  DDR)
·UMC 55nm SP process
·Power supply: 1.8V/1.0V (Internal 3.3V HPD)
·BGA 80 (5x8), pitch 0.65mm
·RoHS compliant and Halogen free package

应用 Application

·Display/Panel