AN8016NSH集成电路（IC）的PMIC-稳压器-DCDC开关式控制器规格书PDF中文资料

AN8016NSH属于集成电路（IC）的PMIC-稳压器-DCDC开关式控制器。由松下电器制造生产的AN8016NSHDC-DC 开关控制器PMIC（电源管理集成电路）DC 到 DC 开关式控制器是用于高效率电路的稳压 IC，其配置为生成高于（突升或步升）或低于（突降或步降）输入电源的输出电源电压。其他拓扑结构可能包括：降压-升压、反激、正激、Cuk、SEPIC、全桥、半桥和推挽式。这些器件不同于需要最小电压并“烧尽”多余电压的线性稳压器。

■ Overview

The AN8016NSH is a single-channel PWM DC-DC converter control IC that supports low-voltage operation. This IC allows a stepped-up voltage output to be provided with a minimal number of external components. It features a low minimum operating voltage of 1.8 V, and due to being provided in a 10-pin surface mount package with a 0.5 mm lead pitch, is optimal for use in miniature high-efficiency power supplies for portable equipment.

■ Features

• Wide operating supply voltage range: 1.8 V to 14 V

• High-precision reference voltage circuit: 1.27 V (allowance: ± 3)

• Supports control over a wide output frequency range: 20 kHz to 1 MHz

• Provides a fixed output current with minimal supply voltage fluctuations by using an external resistor to set the output current with a totem pole structure in the output block.

• Large maximum output current of ± 50 mA

• Timer latch short-circuit protection circuit (charge current: 1.3 µA typical)

• Low input voltage malfunction prevention circuit (U.V.L.O.) (circuit operation start voltage: 1.6 V typical)

• On/off control function (active-high, standby current: 5 µA maximum)

• Fixed maximum duty ratio with small sample-to-sample variations (80 ± 5)

• Adjustable soft start time provided by using separate DTC and S.C.P. pins.

• Adopts a 0.5 mm lead pitch 10 pin SO flat package (SSONF-10D)

• Adopts techniques for reducing noise, increasing the light load efficiency, and suppressing the maximum base current when turning on the npn transistor used as the external switching element.

■ Applications

• LCD displays, digital still cameras, PDAs