首页>AM29DL800BB70EE>规格书详情
AM29DL800BB70EE中文资料PDF规格书
相关芯片规格书
更多- AM29DL800BB120SE
- AM29DL800BB120WBCB
- AM29DL800BB120WBIB
- AM29DL800BB120WBC
- AM29DL800BB120SI
- AM29DL800BB120WBE
- AM29DL800BB120WBEB
- AM29DL800BB120WBI
- AM29DL800BB70EC
- AM29DL800BB70ECB
- AM29DL800BB120SIB
- AM29DL800BB120SEB
- AM29DL800BB120SD
- AM29DL800BB120WBI
- AM29DL800BB120WBF
- AM29DL800BB70ED
- AM29DL800BB120WBC
- AM29DL800BB120WBE
AM29DL800BB70EE规格书详情
GENERAL DESCRIPTION
The Am29DL800B is an 8 Mbit, 3.0 volt-only flash memory device, organized as 524,288 words or 1,048,576 bytes. The device is offered in 44-pin SO, 48-pin TSOP, and 48-ball FBGA packages. The word wide (x16) data appears on DQ0–DQ15; the byte-wide (x8) data appears on DQ0–DQ7. This device requires only a single 3.0 volt VCC supply to perform read, program, and erase operations. A standard EPROM programmer can also be used to program and erase the device.
DISTINCTIVE CHARACTERISTICS
■ Simultaneous Read/Write operations
— Host system can program or erase in one bank, then immediately and simultaneously read from the other bank
— Zero latency between read and write operations
— Read-while-erase
— Read-while-program
■ Single power supply operation
— Full voltage range: 2.7 to 3.6 volt read and write operations for battery-powered applications
■ Manufactured on 0.35 µm process technology
— Compatible with 0.5 µm Am29DL800 device
■ High performance
— Access times as fast as 70 ns
■ Low current consumption (typical values at 5 MHz)
— 7 mA active read current
— 21 mA active read-while-program or read-whileerase current
— 17 mA active program-while-erase-suspended current
— 200 nA in standby mode
— 200 nA in automatic sleep mode
— Standard tCE chip enable access time applies to transition from automatic sleep mode to active mode
■ Flexible sector architecture
— Two 16 Kword, two 8 Kword, four 4 Kword, and fourteen 32 Kword sectors in word mode
— Two 32 Kbyte, two 16 Kbyte, four 8 Kbyte, and fourteen 64 Kbyte sectors in byte mode
— Any combination of sectors can be erased
— Supports full chip erase
■ Unlock Bypass Program Command
— Reduces overall programming time when issuing multiple program command sequences
■ Sector protection
— Hardware method of locking a sector to prevent any program or erase operation within that sector
— Sectors can be locked in-system or via programming equipment
— Temporary Sector Unprotect feature allows code changes in previously locked sectors
■ Top or bottom boot block configurations available
■ Embedded Algorithms
— Embedded Erase algorithm automatically pre-programs and erases sectors or entire chip
— Embedded Program algorithm automatically programs and verifies data at specified address
■ Minimum 1,000,000 program/erase cycles guaranteed per sector
■ Package options
— 44-pin SO
— 48-pin TSOP
— 48-ball FBGA
■ Compatible with JEDEC standards
— Pinout and software compatible with single-power-supply flash standard
— Superior inadvertent write protection
■ Data# Polling and Toggle Bits
— Provides a software method of detecting program or erase cycle completion
■ Ready/Busy# output (RY/BY#)
— Hardware method for detecting program or erase cycle completion
■ Erase Suspend/Erase Resume
— Suspends or resumes erasing sectors to allow reading and programming in other sectors
— No need to suspend if sector is in the other bank
■ Hardware reset pin (RESET#)
— Hardware method of resetting the device to reading array data
供应商 | 型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
---|---|---|---|---|---|---|---|
AMD |
22+ |
TSSOP48 |
15330 |
原装正品 |
询价 | ||
AMD |
22+ |
TSSOP48 |
8000 |
原装正品支持实单 |
询价 | ||
AMD |
22+ |
原厂原封 |
8200 |
原装现货库存.价格优势!! |
询价 | ||
AMD |
2021+ |
TSOP48 |
100500 |
一级代理专营品牌!原装正品,优势现货,长期排单到货 |
询价 | ||
AMD |
23+ |
7300 |
专注配单,只做原装进口现货 |
询价 | |||
SPA |
960 |
询价 | |||||
AMD |
2020+ |
TSOP |
80000 |
只做自己库存,全新原装进口正品假一赔百,可开13%增 |
询价 | ||
Spansion |
20+ |
TSSOP |
35830 |
原装优势主营型号-可开原型号增税票 |
询价 | ||
AMD |
QFP |
4212 |
原厂旗下一级分销商!原装正品现货!假一罚十! |
询价 | |||
AMD |
2339+ |
TSOP |
5650 |
公司原厂原装现货假一罚十!特价出售!强势库存! |
询价 |