AM26LV32EIDR集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

1 Features

• Meets or exceeds standard TIA/EIA-422-B and

ITU recommendation V.11

• Operates from a single 3.3-V power supply

• Switching rates up to 32 MHz

• ESD Protection for RS422 bus pins

(See ESD Ratings)

• Low power dissipation: 27 mW typical

• Open circuit fail-safe

• ±7-V Common-mode input voltage range with

±200-mV sensitivity

• Accepts 5-V logic inputs with 3.3-V supply (enable

inputs)

• Input hysteresis: 35 mV typical

• Pin-to-pin compatible with AM26C32, AM26LS32

• Ioff Supports partial-power-down mode operation

2 Applications

• High-reliability automotive applications

• Configuration control and print support

• ATM and cash counters

• Smart grid

• AC and servo motor drives

3 Description

The AM26LV32E device consists of quadruple

differential line receivers with 3-state outputs. This

device is designed to meet TIA/EIA-422-B and ITU

recommendation V.11 drivers with reduced supply

voltage. The device is optimized for balanced bus

transmission at switching rates up to 32 MHz. The

3-state outputs permit connection directly to a busorganized

system. The AM26LV32E has an internal

fail-safe circuitry that prevents the device from putting

an unknown voltage signal at the receiver outputs.

In the open fail-safe, a high state is produced at

the respective output. This device is supported for

partial-power-down applications using Ioff. Ioff circuitry

disables the outputs, preventing damaging current

back-flow through the device when it is powered

down.