ALD4303ASB中文资料QUAD PRECISION MICROPOWER CMOS VOLTAGE COMPARATOR WITH DRIVER数据手册ALD规格书

描述 Description

GENERAL DESCRIPTION
The ALD4303A/ALD4303 is a precision monolithic high performance quad voltage comparator with open drain output built with advanced silicon gate CMOS technology. It features very high typical input impedance of 1012Ω; low input bias current of 10pA; very low power dissipation of 7.5µA per comparator; micropower operation; high output drive and single (+5V) or dual (±5V) power supply operation.
The input voltage range includes ground, making this comparator ideal for single supply low level signal detection with high source impedance. The ALD4303A/ALD4303 can be used in connection with other voltage comparator circuits such as the ALD2301/ALD2302/ALD4302 voltage comparators. The outputs can be connected to a higher external voltage than V+ and used in a wired-OR connection with other open drain circuits such as ALD2301/ALD2303. They can also be used with push-pull output types such as ALD2302/ALD4302 voltage comparators simultaneously with open drain comparators using a common V+.FEATURES
• 3V, 5V and 12V supply
• Guaranteed to drive 200Ω loads
• Fanout of 30LS TTL loads
• Guaranteed maximum supply current of 22µA per comparator
• Industry standard pinout of LM393 type
• Extremely low input bias currents -- 10pA
• Virtually eliminates source impedance effects
• Single (+5V) and dual supply (±5V) operation
• CMOS, NMOS and TTL compatible
• Open drain wired-OR outputs
• Compatible with push-pull outputs
• High output sinking current -- 60mA
• Low supply current spikes
• High gain -- 100V/mVAPPLICATIONS
• Sensor detection circuits
• PCMCIA instruments
• MOSFET driver
• High source impedance voltage comparison circuits
• Multiple limit window comparator
• Power supply voltage monitor
• Photodetector sensor circuit
• High speed LED driver
• Oscillators
• Battery operated instruments
• Remote signal detection
• Multiple relay driversBENEFITS
• Extremely low power and high precision combination
• Built-in high input impedance buffer
• Built-in output driver with up to 60mA sink current

特性 Features

• 3V, 5V and 12V supply
• Guaranteed to drive 200Ω loads
• Fanout of 30LS TTL loads
• Guaranteed maximum supply current of 22µA per comparator
• Industry standard pinout of LM393 type
• Extremely low input bias currents -- 10pA
• Virtually eliminates source impedance effects
• Single (+5V) and dual supply (±5V) operation
• CMOS, NMOS and TTL compatible
• Open drain wired-OR outputs
• Compatible with push-pull outputs
• High output sinking current -- 60mA
• Low supply current spikes
• High gain -- 100V/mV