AL1G125C5R中文资料创瑞科技数据手册PDF规格书

DESCRIPTION

This bus buffer gate is designed for 1.65V to 5.5V VCC operation. The AL1G125 is a single line driver with 3-state output. The output is disabled when the output-enable (OE̅̅̅̅̅) input is high.

The CMOS AL1G125 has high output drive while maintaining low static power dissipation over a broad Vcc operating range.

The AL1G125 is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

To ensure the high-impedance state during power up or power down, OE̅̅̅̅̅ should be tied to VCC through a pullup resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver.

The AL1G125 is available in SOT 25 and SC70 5

packages.

FEATURES

⚫ Support 5V Vcc Operation

⚫ Inputs Accept Voltages to 5.5V

⚫ Provide Down Traslation to Vcc

⚫ Low Power Consumption:1μA (Max)

⚫ ±24mA Output Drive at V CC =3.0V

⚫ Latch up Performance Exceeds 100mA

⚫ Operating Temperature Range:

-

40°C to +125°C

⚫ Available in SOT 25 and SC70 5 p ackage s

APPLICATION

⚫ Cable Modem Termination System

⚫ High Speed Data Acquisition and Generation

⚫ Military: Radar and Sonar

⚫ Motor Control: High Voltage

⚫ Power Line Communication Modem

⚫ SSD: Internal or External

⚫ Video Broadcasting and Infrastructure: Scalable

Platform

⚫ Video Broadcasting: IP Based Multi Format

⚫ Transcoder

⚫ Video Co mmunication System

⚫ AV Receiver , Portable Media Player

⚫ Digital Picture Frame (DPF)

⚫ Personal Navigation Device (GPS)