AK09915C数据手册传感器变送器的磁性传感器-线性罗盘（IC）规格书PDF

描述 Description

AK09915C is 3-axis electronic compass IC with high sensitive Hall sensor technology.

Small package of AK09916C incorporates magnetic sensors for detecting terrestrial magnetism in the X-axis, Y-axis, and Z-axis, a sensor driving circuit, signal amplifier chain, and an arithmetic circuit for processing the signal from each sensor. Self test function is also incorporated. From its compact foot print and thin package feature, it is suitable for map heading up purpose in GPS-equipped cell phone or media tablet to realize pedestrian navigation function.



AK09915C has the following features:


Silicon monolithic Hall-effect magnetic sensor with magnetic concentrator realizes 3-axis magnetometer on a silicon chip. Analog circuit, digital logic and interface block are also integrated on a chip.
Wide dynamic measurement range and high resolution with lower current consumption.
Output data resolution: 16-bit (0.15 μT/LSB)
Measurement range: ± 4900 μT
Average current at 100Hz repetition rate: 0.9mA (typ.)
(3) Digital serial interface
- I2C bus interface （Standard,Fast,High-speed mode）/4 wire SPI
(4) Device is worked by on-chip oscillator so no external clock source is necessary.
(5) Self test function with internal magnetic source to confirm magnetic sensor operation on end products.
(6) The AK09915C includes an on-chip Noise Suppression Filter (NSF). Additional noise reduction is available with a NSF. A NSF on and off is selectable.

特性 Features

·　Product Name：　AK09915C　3-axis electronic compass IC　　■ A 3-axis electronic compass IC with high sensitive Hall sensor technology.　■ Best adapted to pedestrian city navigation use for cell phone and other portable appliance.：
· Functions；　3-axis magnetometer device suitable for compass application ；
·　Built-in A/D converter for magnetometer data out；
·  Operation modes: power-down/single measurement/continuous measurement/self test；
·　Magnetic sensor overflow monitor function ；
·　Built-in oscillator for internal clock source；
·　Power on Reset circuit ；
·　Self test function with built-in internal magnetic source ；
·　Serial interface: I2C bus interface (standard mode/fast mode/High speed mode) / 4 wire SPI：
·　On-chip Noise Suppression Filter (NSF)；
·　Sensor drive mode : low-power or low-noise drive mode；
·　On-chip 32-step FIFO buffer；
· Sensitivity：　0.15 μT / LSB；
· Output Bit：  16-bit data out for each 3 axis magnetic components ：
· Measurement Range：　±4,900 μT；
· Maximum ODR：　100 Hz：
· Peak Current：　2.1 mA：
· Current Consumption：　○ Measurement: 0.9mA  (100 Hz repetition rate average,)　○ Power-down: 3 μA (typ.) ：
· Supply Voltage：　VDD：1.7 to 3.6 V　 VID：1.65 to VDD：
· Operation Temperature：　-30 to 85 ℃ ；
· Package：　14-pin WL-CSP (BGA)　(1.6mm x 1.6mm x 0.5mm)；
· Sales Start：　Available Now：
· Samples　>Distributors/Representatives：　Contact Us：

应用 Application

Best adapted to pedestrian city navigation use for cell phone and other portable appliance.