AH3769Q中文资料High-Voltage, Low-Sensitivity Automotive Hall Effect Latch数据手册Diodes规格书

描述 Description

The AH3769Q is an AECQ100 qualified high voltage low sensitivity Automotive Hall Effect latch IC designed for brushless DC motor commutation, speed measurement, angular or linear encoders and position sensors in automotive applications. To support wide range of demanding applications, the design has been optimized to operate over the supply range of 3.0V to 28V. With chopper stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3769Q provides a reliable solution over the whole operating range. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply. The output has a current limit and a Zener clamp.

The single open drain output can be switched on with South pole of sufficient strength and switched off with North pole of sufficient strength. When the magnetic flux density (B) perpendicular to the package is larger than the operate point (Bop) the output is switched on (pulled low). The output is held latched until magnetic flux density reverses and becomes lower than the release point (Brp).



The AH3769Q is available in industry standard SOT23and SIP-3 packages.

特性 Features

Bipolar Latch Operation (South Pole: On, North Pole: off)
High Sensitivity: Bop and Brp of +220G and -220G Typical
Single Open Drain Output with Current Limit
3.0V to 28V Operating Voltage Range
Chopper Stabilized Design Provides
     o Superior Temperature Stability
     o Minimal Switch Point Drift
     o Enhanced Immunity to Stress
Good RF Noise Immunity
Reverse Blocking Diode and Zener Clamp on Supply
-40C to 150C Operating Temperature
ESD: HBM ＞ 8KV, CDM: >2kV
AECQ100 Grade 0 Qualified
Industry Standard SOT23 and SIP-3L Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)

应用 Application

Automotive motor commutation, position control and speed sensing.
Window lifter, Sun roof, Wiper, Tailgates, Power Seat, water, oil and fuel pumps

简介

AH3769Q属于传感器变送器的磁性传感器-开关（固态）。由制造生产的AH3769Q磁性传感器 - 开关（固态）该系列产品使用固态技术来检测是否存在超过某个特定幅度和/或标示的磁场，并提供指示是否存在此类磁场的双态输出。它们与磁簧开关以及线性或罗盘型固态器件不同，前者通过使用移动机械部件来提供类似的功能，后者提供指示所施加磁场的强度和/或方向的可变输出。