AH3564Q数据手册传感器变送器的磁性传感器-开关（固态）规格书PDF

描述 Description

The AH3564Q is an AECQ100-qualified high-voltage, high-sensitivity Hall effect omnipolar switch IC designed for position and proximity sensing in automotive applications, such as in seat and seatbelt buckle, steering lock/immobilization, gear stick, transmission actuator and gear position, HVAC compression, wiper, door/trunk closure, and so on. To support a wide range of demanding applications, the design is optimized to operate over the supply range of 3.0V to 28V. With chopper-stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3564Q provides a reliable solution over the whole operating range. For robustness and protection, the device has a reverse blocking diode with a zener clamp on the supply. The output has an overcurrent limit and a zener clamp.The single open-drain output can be switched on with south or north pole of sufficient strength. When the magnetic flux density (B) perpendicular to the package is larger than the operate point (BOP), the output is switched on (pulled low) and is held on until the magnetic flux density B is lower than the release point (BRP).

特性 Features

•Omnipolar Operation 
•High Sensitivity: BOP and BRP of ±40G and ±25G Typical
•Single Open Drain Output with Over Current Limit
•3.0V to 28V Operating Voltage Range
•Chopper Stabilized Design Provides
•Superior Temperature Stability
•Minimal Switch Point Drift
•Enhanced Immunity to Stress
•Good RF Noise Immunity
•Reverse Blocking Diode 
•Zener Clamp on Supply and Output Pins 
•-40°C to +150°C Operating Temperature
•ESD: HBM ＞ 8kV, CDM: >2kV
•Industry Standard SOT23 and SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) Packages

应用 Application

•Position and Proximity Sensing in Automotive Applications
•Open and Close Detect
•Position Detect
•Level Detect
•Flow Meters
•Contact-Less Switches 
•Seatbelt Buckle
•Seat Position