AH173-PL-A-B传感器变送器的磁性传感器-开关（固态）规格书PDF中文资料

AH173-PL-A-B属于传感器变送器的磁性传感器-开关（固态）。由美台半导体制造生产的AH173-PL-A-B磁性传感器 - 开关（固态）该系列产品使用固态技术来检测是否存在超过某个特定幅度和/或标示的磁场，并提供指示是否存在此类磁场的双态输出。它们与磁簧开关以及线性或罗盘型固态器件不同，前者通过使用移动机械部件来提供类似的功能，后者提供指示所施加磁场的强度和/或方向的可变输出。

General Description

AH173 is a single-digital-output Hall-effect sensor with pull-up resistor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, and a comparator to provide switching hysteresis for noise rejection, and an output driver with a pull-up resistor (Rpu). An internal band-gap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. While the magnetic flux density (B) is larger than operate point (Bop), the OUT pin turns on (low). If B moves toward release point (Brp), the OUT pin is latched “on” state prior to B

特性 Features

• Bipolar Hall Effect Latch Sensor

• 3V to 20V DC Operation Voltage

• Built-in Pull-Up Resistor

• 25mA Output Sink Current

• Operating Temperature: −40°C ~ +125°C

• Lead Free Finish/RoHS Compliant for Lead Free products (Note 1)

• Lead Free Package: SIP-3L, SC59-3L

• Green Package: SC59-3L

Applications

• Rotor Position Sensing

• Current Switch

• Encoder

• RPM Detection