AFE882H1中文资料适用于 PLC 和传感器变送器应用且具有 HART®、16 位 DAC 和 12 位 ADC 的低功耗 AFE数据手册TI规格书

描述 Description

The 16-bit AFE882H1 and 14-bit AFE782H1 (AFEx82H1) are highly-integrated, high-accuracy, extremely low-power DACs with voltage-outputs designed for HART-enabled process control and industrial automation applications.

The AFEx82H1 devices include most of the components required to design a 4‑mA to 20‑mA, 3‑wire or 4-wire sensor transmitter or analog output module. In addition to the highly accurate DAC, these devices include a HART®-compliant FSK modem, 10-ppm/°C voltage reference, and diagnostic analog-to-digital converter (ADC). To accommodate intrinsic and functional safety concerns, external voltage-to-current conversion and power-regulation are required.

The internal diagnostic ADC is multiplexed to several internal nodes that enable an automatic self-health check. This check is capable of detecting errors or malfunctions of the internal bias sources, power regulator, voltage reference, DAC output, die temperature, and optional external voltage source. If any fault is detected from the diagnostic ADC, CRC frame-error checking, or windowed watchdog timer, the devices can optionally issue an interrupt, enter a user-specified fail-safe state, or both.

特性 Features

Functional Safety-Capable

Documentation available to aid functional safety system design



Low quiescent current: 180 µA (typical)

HART-compliant physical layer modem

Programmable amplitude of TX signals

RX demodulator and band-pass filter



16-bit or 14-bit monotonic high-performance DAC

DAC output range: 0 V to 2.5 V

Digital DAC slew-rate control

4-LSB INL at 16 bits

0.07% FSR (max) TUE from –40°C to +125°C



12-bit 3.84-kSPS ADC for advanced diagnostics

Integrated 1.25-V reference at 10 ppm/°C (max)

Internal 1.2288-MHz oscillator with clock output

Digital interface

Serial peripheral interface (SPI): Shared bus for both DAC and HART

Universal asynchronous receiver-transmitter (UART): Shared bus for both DAC and HART

Both: SPI for DAC and UART for HART



Fault detection: CRC bit error checking, windowed watchdog timer, diagnostic ADC

Wide operating temperature: –55°C to +125°C