ADXL359传感器变送器的运动传感器-加速计规格书PDF中文资料

ADXL359属于传感器变送器的运动传感器-加速计。由亚德诺半导体技术有限公司制造生产的ADXL359运动传感器 - 加速计加速度计用于检测并响应运动或振动等加速度的变化。加速度计类型有 X、Y 或 Z 轴上的模拟或数字加速度计，加速度范围为 ±0.5 g 至 ±2000 g，灵敏度为 1 至 500 k (LSB/g)，输出类型有模拟电压、蓝牙、数字、DSI、IEPE、I2C、PCM、PWM、射频和 SPI。

GENERAL DESCRIPTION

The digital output ADXL3591 is a low noise density, low 0 g offset

drift, low power, 3-axis microelectromechanical system (MEMS)

accelerometer with selectable measurement ranges. The ADXL359

supports the ±10 g, ±20 g, and ±40 g ranges.

The ADXL359 offers industry leading noise, minimal offset drift over

temperature, and long-term stability, enabling precision applications

with minimal calibration.

The low drift, low noise, and low power ADXL359 enables accurate

tilt measurement in an environment with high vibration, such as

airborne inertial measurement units (IMUs). The low noise over

higher frequencies is ideal for wireless condition monitoring.

The ADXL359 multifunction pin names may be referenced only by

their relevant function for either the serial peripheral interface (SPI)

or limited I2C interface.

FEATURES

► 0 g offset vs. temperature (all axes): 0.45 mg/°C typical

► Ultralow noise density (all axes): 80 μg/√Hz

► Low power, VSUPPLY (LDO enabled)

► In measurement mode: 200 μA

► In standby mode: 21 μA

► Digital output features

► Digital SPI and limited I2C interfaces supported

► 20-bit ADC

► Data interpolation routine for synchronous sampling

► Programmable high-pass and low-pass digital filters

► Integrated temperature sensor

► Voltage range options

► VSUPPLY with internal regulators: 2.25 V to 3.6 V

► V1P8ANA, V1P8DIG with internal LDO regulator bypassed: 1.8 V

typical ± 10%

► Operating temperature range: −40°C to +125°C

► 14-terminal, 4 mm × 4 mm × 1.04 mm, LGA package

APPLICATIONS

► IMUs and altitude and heading reference systems (AHRSs)

► Platform stabilization systems

► Vibration sensing

► Structural health monitoring

► Tilt sensing

► Robotics

► Condition monitoring