ADUM5210ARSZ-RL7中文资料亚德诺数据手册PDF规格书

GENERAL DESCRIPTION

The ADuM5210/ADuM5211/ADuM52121 are dual-channel digital

isolators with isoPower®, an integrated, isolated dc-to-dc converter. Based on the Analog Devices, Inc., iCoupler® technology, the dc-to-

dc converter provides regulated, isolated power that is adjustable

between 3.135 V and 5.25 V. Input supply voltages can range from slightly below the required output to significantly higher. Popular

voltage combinations and their associated power levels are shown in Table 2. The ADuM5210/ADuM5211/ADuM5212 eliminate the need for a

separate, isolated dc-to-dc converter in low power, isolated designs. The iCoupler chip-scale transformer technology is used for isolated logic signals and for the magnetic components of the dc-to-dc converter. The result is a small form factor, total isolation

solution. isoPower uses high frequency switching elements to transfer power through its transformer. Take special care during printed circuit board (PCB) layout to meet emissions standards. See the

AN-0971 Application Note for board layout recommendations.

FEATURES isoPower integrated, isolated dc-to-dc converter Regulated 3.135 V to 5.25 V output

Up to 150 mW output power

Dual dc-to-100 Mbps (NRZ) signal isolation channels Soft start power supply

20-lead SSOP package with 5.3 mm creepage

Supports SPI up to 15 MHz

High temperature operation: 105°C High common-mode transient immunity: >25 kV/μs

Safety and regulatory approvals UL recognition 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12

VIORM = 560 V peak

APPLICATIONS

RS-232 transceivers Power supply start-up bias and gate drives Isolated sensor interfaces

Industrial PLCs