ADS8344EB/2K5集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

ADS8344EB/2K5属于集成电路（IC）的模数转换器（ADC）。由德州仪器制造生产的ADS8344EB/2K5模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

FEATURES

PIN FOR PIN WITH ADS7844

SINGLE SUPPLY: 2.7V to 5V

8-CHANNEL SINGLE-ENDED OR

4-CHANNEL DIFFERENTIAL INPUT

UP TO 100kHz CONVERSION RATE

84dB SINAD

SERIAL INTERFACE

QSOP-20 AND SSOP-20 PACKAGES

APPLICATIONS

DATA ACQUISITION

TEST AND MEASUREMENT EQUIPMENT

INDUSTRIAL PROCESS CONTROL

PERSONAL DIGITAL ASSISTANTS

BATTERY-POWERED SYSTEMS

DESCRIPTION

The ADS8344 is an 8-channel, 16-bit, sampling

Analog-to-Digital (A/D) converter with a synchronous serial

interface. Typical power dissipation is 10mW at a 100kHz

throughput rate and a +5V supply. The reference voltage

(VREF) can be varied between 500mV and VCC, providing a

corresponding input voltage range of 0V to VREF. The

device includes a shutdown mode that reduces power dissipation

to under 15μW. The ADS8344 is tested down to 2.7V

operation.

Low power, high speed, and an on-board multiplexer make

the ADS8344 ideal for battery-operated systems such as

personal digital assistants, portable multi-channel data loggers,

and measurement equipment. The serial interface also

provides low-cost isolation for remote data acquisition. The

ADS8344 is available in a QSOP-20 or SSOP-20 package

and is ensured over the –40°C to +85°C temperature range.