ADS8317IB集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

ADS8317IB属于集成电路（IC）的模数转换器（ADC）。由德州仪器制造生产的ADS8317IB模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

1FEATURES

23• 16 Bits No Missing Codes (Full-Supply Range,

High or Low Grade)

• Very Low Noise: 5LSBPP

• Excellent Linearity:

±0.8LSB typ, ±1.5LSB max INL

+0.7LSB typ, +1.25LSB max DNL

±1mV max Offset

±16LSB typ Gain Error

• microPower:

10mW at 5V, 250kHz

4mW at 2.7V, 200kHz

2mW at 2.7V, 100kHz

0.2mW at 2.7V, 10kHz

• Packages: MSOP-8, SON-8

• Pin-Compatible with the ADS8321

• Serial ( SPI™/SSI) Interface

APPLICATIONS

• Battery-Operated Systems

• Remote Data Acquisition

• Isolated Data Acquisition

• Simultaneous Sampling, Multichannel

Systems

• Industrial Controls

• Robotics

• Vibration Analysis

DESCRIPTION

The ADS8317 is a 16-bit, sampling, analog-to-digital

(A/D) converter specified for a supply voltage range

from 2.7V to 5.5V. It requires very little power, even

when operating at the full data rate. At lower data rates, the high speed of the device enables it to

spend most of its time in the power-down mode. For

example, the average power dissipation is less than

0.2mW at a 10kHz data rate.

The ADS8317 offers excellent linearity and very low

noise and distortion. It also features a synchronous

serial (SPI/SSI-compatible) interface and a differential

input. The reference voltage can be set to any level

within the range of 0.1V to VDD/2.

Low power and small size make the ADS8317 ideal

for portable and battery-operated systems. It is also

an excellent fit for remote data-acquisition modules,

simultaneous multichannel systems, and isolated

data acquisition. The ADS8317 is available in

MSOP-8 and SON-8 packages. The SON package size is the same as a 3x3 QFN package.