ADS1282IPW集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

ADS1282IPW属于集成电路（IC）的模数转换器（ADC）。由德州仪器制造生产的ADS1282IPW模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

1 Features

1• High Resolution:

130-dB SNR (250 SPS)

• High Accuracy:

THD: –122 dB

INL: 0.5 ppm

• Low-Noise PGA

• Two-Channel Input Mux

• Inherently-Stable Modulator with Fast Responding

Overrange Detection

• Flexible Digital Filter:

Sinc + FIR + IIR (Selectable)

Linear or Minimum Phase Response

Programmable High-Pass Filter

Selectable FIR Data Rates: 250 SPS to 4 kSPS

• Filter Bypass Option

• Low Power Consumption: 25 mW

Shutdown: 10 μW

• Offset and Gain Calibration Engine

• SYNC Input high•

Analog Supply:

Unipolar (+5 V) or Bipolar (±2.5 V)

• Digital Supply: 1.8 V to 3.3 V

2 Applications

• Energy Exploration

• Seismic Monitoring

• High-Accuracy Instrumentation

3 Description

The ADS1282 is an extremely high-performance,

single-chip analog-to-digital converter (ADC) with an

integrated, low-noise programmable gain amplifier

(PGA) and two-channel input multiplexer (mux). The

ADS1282 is suitable for the demanding needs of

energy exploration and seismic monitoring

environments.

The converter uses a fourth-order, inherently stable,

delta-sigma (ΔΣ) modulator that provides outstanding

noise and linearity performance. The modulator is

used either in conjunction with the on-chip digital filter, or can be bypassed for use with post

processing filters.

The flexible input MUX provides an additional

external input for measurement, as well as internal

self-test connections. The PGA features outstanding

low noise (5 nV/√Hz) and high input impedance,

allowing easy interfacing to geophones and

hydrophones over a wide range of gains.

The digital filter provides selectable data rates from

250 to 4000 samples per second (SPS). The high•

pass filter (HPF) features an adjustable corner

frequency. On-chip gain and offset scaling registers support system calibration.

The synchronization input (SYNC) can be used to

synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for

continuous alignment of conversions from an external

source.

Together, the amplifier, modulator, and filter dissipate

25 mW. The ADS1282 is available in a compact

TSSOP-28 package and is fully specified from –40°C

to +85°C, with a maximum operating range to

+125°C.