ADRF5063中文资料9 kHz to 13 GHz, Differential SPDT Switch数据手册ADI规格书

描述 Description

The ADRF5063 is a silicon, nonreflective, differential, SPDT switch.The ADRF5063 operates from 9 kHz to 13 GHz with insertionloss of lower than 0.9 dB and isolation of higher than 40 dB. TheADRF5063 has a RF input power handling capability of differential31 dBm for through paths, differential 30 dBm for terminated pathsand differential 27 dBm hot switching at the RF common port.
The ADRF5063 can operate with dual-supply voltages of ±3.3 Vor a single-supply voltage of +3.3V when VSS is connected toGND. The ADRF5063 employs complementary metal-oxide semiconductor(CMOS)-compatible and low voltage transistor logic(LVTTL)-compatible controls. The ADRF5063 has an enable controlto feature all off states.

The ADRF5063 can also operate with a single positive supplyvoltage (VDD) applied while the negative supply voltage (VSS) isconnected to ground. In this operating condition, the small signalperformance is maintained while the switching characteristics, linearity,and power handling performance is derated.
The ADRF5063 is pin-compatible with the ADRF5062, fast switchingversion, which operates from 100 MHz to 13 GHz.
The ADRF5063 comes in a 20-terminal, 3.0 mm × 3.0 mm LGApackage and can operate from −40°C to +105°C.
Applications

Test instrumentation
Data converter interfaces
High data rate interfaces

特性 Features

Frequency range: 9 kHz to 13 GHz
Nonreflective, differential, 100 Ω impedance design
Low insertion loss 0.8 dB to 10 GHz
0.9 dB to 13 GHz

High isolation >45 dB to 10 GHz
>40 dB to 13 GHz

High input linearity P0.1dB: >31 dBm typical
IP3: 65 dBm typical

High power handling Through path: 31 dBm typical
Terminated path: 30 dBm typical
Hot switching: 27 dBm typical

On and off time: 5 μs typical
Positive control interface: CMOS-/LVTTL-compatible
All off state control
Pin-compatible with ADRF5062, fast switching version
20-terminal, 3.0 mm × 3.0 mm LGA package