Power Management IC for Automotive Application

GENERAL DESCRIPTION The ADP5140 integrates four high performance, synchronous, step-down buck regulators (BUCK1 to BUCK4), one boost regulator, and seven low noise, low dropout (LDO) regulators (LDO1 to LDO7). The buck regulators support input voltages from 2.7 V to 5.5 V and provide output curre

文件：3.23982 Mbytes 页数：128 Pages

AD

亚德诺

适合汽车应用的电源管理IC

ADP5140集成了四个高性能、同步降压稳压器（BUCK1至BUCK4）、一个升压稳压器和七个低噪声、低压差(LDO)稳压器（LDO1至LDO7）。降压稳压器支持2.7 V至5.5 V的输入电压并提供2.5 A至3 A的输出电流。升压稳压器提供5 V固定输出和400 mA负载电流。七个LDO为系统提供干净的输出电压。LDO5提供可用于为噪声敏感负载供电的低噪声输出。\n\n ADP5140在2.2 MHz的固定开关频率(fSW)下运行，也可同步至同步范围为1.9 MHz至2.4 MHz的外部时钟，此频率范围超出了调幅(AM)频段。四个降压型稳压器以90°异相运行以减小输入纹波电流和输 • 降压调节器\n• BUCK1，使用 DVS 时的最大连续输出电流范围为 2.5 A\n\n• BUCK2，使用可调输出电压时的最大连续输出电流范围为 2.5 A\n\n• BUCK3，使用可调输出电压时的最大连续输出电流范围为 3 A\n\n• BUCK4，使用低噪声输出时的最大连续输出电流范围为 3 A\n\n\n\n\n• 升压稳压器：固定 5 V 输出，400 mA 输出电流范围\n\n• 具有低噪声输出的七个 LDO 稳压器\n• LDO1：300 mA\n\n• LDO2：2.3 A\n\n• LDO3：1.4 A\n\n• LDO4：1.2 A\n\n• LDO5：500 mA;

ADI

亚德诺

Package：6-DIP 模块；包装：托盘 类别：传感器，变送器 压力传感器、变送器 描述：SENSOR PRESSURE 100KPA STD DIP

PANASONIC

松下

Power Management IC for Automotive Application

GENERAL DESCRIPTION The ADP5140 integrates four high performance, synchronous, step-down buck regulators (BUCK1 to BUCK4), one boost regulator, and seven low noise, low dropout (LDO) regulators (LDO1 to LDO7). The buck regulators support input voltages from 2.7 V to 5.5 V and provide output curre

文件：3.23982 Mbytes 页数：128 Pages

AD

亚德诺

Power Management IC for Automotive Application

GENERAL DESCRIPTION The ADP5140 integrates four high performance, synchronous, step-down buck regulators (BUCK1 to BUCK4), one boost regulator, and seven low noise, low dropout (LDO) regulators (LDO1 to LDO7). The buck regulators support input voltages from 2.7 V to 5.5 V and provide output curre

文件：3.23982 Mbytes 页数：128 Pages

AD

亚德诺