ADM8832ACP集成电路（IC）的特殊用途稳压器规格书PDF中文资料

ADM8832ACP属于集成电路（IC）的特殊用途稳压器。由亚德诺半导体技术有限公司制造生产的ADM8832ACP特殊用途稳压器该系列产品用于电源控制、某种形式的转换，适用于特定的复杂应用。因此，各种产品特性集差异较大，包括空燃比传感器接口、汽车交流发电机电压调节、DDR 端接、液体透镜控制、摩托车转向信号控制、热电 (peltier) 冷却器控制、压电触觉控制、阀门控制、小型发动机管理等。

GENERAL DESCRIPTION

The ADM8832 is a charge pump regulator used for color thin film transistor (TFT) liquid crystal displays (LCD). Using charge pump technology, the device can be used to generate three output voltages (+5.1 V ±2, +15.3 V, −10.2 V) from a single 3 V input supply. These outputs are then used to provide supplies for the LCD controller (+5.1 V) and the gate drives for the transistors in the panel (+15.3 V and −10.2 V). Only a few external capacitors are needed for the charge pumps. An efficient low dropout voltage regulator also ensures that the power efficiency is high and provides a low ripple 5.1 V output. This LDO can be shut down and an external LDO used to regulate the 5 V doubler output and drive the input to the charge pump section, which generates the +15.3 V and −10.2 V outputs if so required by the user.

FEATURES

3 output voltages (+5.1 V, +15.3 V, −10.2 V) from one 3 V

input supply

Power efficiency optimized for use with TFT in mobile

phones

Low quiescent current

Low shutdown current (<1 µA)

Fast transient response

Shutdown function

Power saving during blanking period

Option to use external ldo

APPLICATIONS

Handheld instruments

TFT LCD panels

Cellular phones