GENERAL DESCRIPTION

The ADM803/ADM809/ADM810 supervisory circuits monitor the power supply voltage in microprocessor systems. They provide a reset output during power-up, power-down, and brownout conditions. On power-up, an internal timer holds reset asserted for 240 ms. This holds the microprocessor in a reset state until conditions have stabilized. The reset output remains operational with VCC as low as 1 V. The ADM803 and ADM809 provide an active low reset signal (RESET), whereas the ADM810 provides an active high signal (RESET) output. The ADM809 and ADM810 have push-pull outputs, whereas the ADM803 has an open-drain output, which requires an external pull-up resistor.

FEATURES

Specified over temperature

Low power consumption: 17 μA

Precision voltage monitor: 2.5 V, 3 V, 3.3 V, 5 V options

Reset assertion down to 1 V VCC

140 ms minimum power-on reset

Open-drain RESET output (ADM803)

Push-pull RESET output (ADM809)

Push-pull RESET output (ADM810)

SC70 and SOT-23 packages

APPLICATIONS

Microprocessor systems

Computers

Controllers

Intelligent instruments

Automotive systems

ADM810TART属于集成电路（IC） > 监控器。亚德诺半导体技术有限公司制造生产的ADM810TART监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。