짹15 kV ESD Protected, Slew Rate Limited, 5 V, RS-485 Transceiver

GENERAL DESCRIPTION The ADM483E is a 5 V, low power data transceiver with ±15 kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. The ADM483E is designed for balanced data transmission and complies with TIA/EIA Standards RS-485 and RS-422, which allow up

文件：364.38 Kbytes 页数：16 Pages

AD

亚德诺

15,-15 kV ESD Protected, Slew Rate

GENERAL DESCRIPTION The ADM483E is a 5 V, low power data transceiver with ±15 kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. The ADM483E is designed for balanced data transmission and complies with TIA/EIA Standards RS-485 and RS-422, which allow up

文件：378.53 Kbytes 页数：16 Pages

AD

亚德诺

±15 kV ESD Protected, Slew Rate Limited, 5 V, RS-485 Transceiver

FEATURES ±15 kV ESD protection 250 kbps data rate Reduced slew rate for low EM interference Single 5 V ± 10 supply −7 V to +12 V bus common-mode range Up to 32 nodes on the bus Receiver open-circuit, fail-safe design Short-circuit protection 36 μA supply current 0.1 μA shutdown current

文件：363.56 Kbytes 页数：16 Pages

AD

亚德诺

±15 kV ESD Protected, Slew Rate Limited, 5 V, RS-485 Transceiver

FEATURES ±15 kV ESD protection 250 kbps data rate Reduced slew rate for low EM interference Single 5 V ± 10 supply −7 V to +12 V bus common-mode range Up to 32 nodes on the bus Receiver open-circuit, fail-safe design Short-circuit protection 36 μA supply current 0.1 μA shutdown current

文件：363.56 Kbytes 页数：16 Pages

AD

亚德诺

짹15 kV ESD Protected, Slew Rate Limited, 5 V, RS-485 Transceiver

GENERAL DESCRIPTION The ADM483E is a 5 V, low power data transceiver with ±15 kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. The ADM483E is designed for balanced data transmission and complies with TIA/EIA Standards RS-485 and RS-422, which allow up

文件：364.38 Kbytes 页数：16 Pages

AD

亚德诺

15,-15 kV ESD Protected, Slew Rate

GENERAL DESCRIPTION The ADM483E is a 5 V, low power data transceiver with ±15 kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. The ADM483E is designed for balanced data transmission and complies with TIA/EIA Standards RS-485 and RS-422, which allow up

文件：378.53 Kbytes 页数：16 Pages

AD

亚德诺

5 V、±15 kV ESD保护、限摆率、低功耗、半双工RS-485/RS-422收发器

ADM483E是一款5 V低功耗数据收发器，提供±15 kV ESD保护，适用于多点总线传输线路的半双工通信。它针对平衡数据传输而设计，符合TIA/EIA标准RS-485和RS-422，一条总线上最多可以连接32个收发器。 \n\n ADM483E具有低功耗关断模式；这种模式下，功耗仅为0.1 μA。 \n\n 由于任一时间仅使能一个驱动器，因此禁用或关断驱动器的输出处于三态，避免总线过载。 \n\n              驱动器具有短路限流保护功能；热关断电路可将驱动器输出置于高阻抗状态，防止功耗过大。接收器输入具有故障安全特性，当输入开路时，可保证 • ±15 kV ESD保护\n\n• 数据速率：250 kbps\n\n• 压摆率降低以实现低电磁辐射(EMI)\n\n• 5 V ± 10%单电源\n\n• 总线共模范围：−7 V至+12 V;

ADI

亚德诺

Package：8-SOIC（0.154"，3.90mm 宽）；包装：卷带（TR） 类别：集成电路（IC） 驱动器，接收器，收发器 描述：IC TRANSCEIVER HALF 1/1 8SOIC

AD

亚德诺

Package：8-SOIC（0.154"，3.90mm 宽）；包装：管件 类别：集成电路（IC） 驱动器，接收器，收发器 描述：IC TRANSCEIVER HALF 1/1 8SOIC

AD

亚德诺