5 V Low Power, Slew-Rate Limited RS-485/RS-422 Transceiver

GENERAL DESCRIPTION The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus transmission lines. It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driv

文件：218.41 Kbytes 页数：16 Pages

AD

亚德诺

5 V、低功耗、限摆率、RS-485/RS-422收发器

ADM483是一款低功耗差分线路收发器，适用于多点总线传输线路的半双工数据通信。它针对平衡数据传输而设计，符合EIA标准RS-485和RS-422。该器件内置一个差分线路驱动器和一个差分线路接收器，二者共用相同的差分引脚，任一给定时间只能使能其中之一。 \n\n                  该器件具有12 kΩ输入阻抗，总线上最多可以连接32个收发器。由于任一时间仅使能一个驱动器，因此禁用或关断驱动器的输出处于三态，避免总线过载。在–7 V至+12 V的整个共模电压范围内，驱动器均可保持此高阻抗输出。\n\n 如果输入未连接（浮地），接收器所具有的故障安全特性将使输出 • 符合EIA RS-485/RS-422标准\n\n• 数据速率最高可达250 kbps\n\n• 压摆率受限以实现低电磁辐射(EMI)\n\n• 关断模式电源电流：100 nA\n\n• 低功耗：120 µA\n\n• 一条总线上最多连接32个收发器;

ADI

亚德诺

5 V Low Power, Slew-Rate Limited RS-485/RS-422 Transceiver

GENERAL DESCRIPTION The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus transmission lines. It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driv

文件：218.41 Kbytes 页数：16 Pages

AD

亚德诺

5 V Low Power, Slew-Rate Limited RS-485/RS-422 Transceiver

GENERAL DESCRIPTION The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus transmission lines. It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driv

文件：309.73 Kbytes 页数：16 Pages

AD

亚德诺

5V Low Power, Slew-Rate Limited

GENERAL DESCRIPTION The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus transmission lines. It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driv

文件：310.39 Kbytes 页数：16 Pages

AD

亚德诺

5V Low Power, Slew-Rate Limited

GENERAL DESCRIPTION The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus transmission lines. It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driv

文件：310.39 Kbytes 页数：16 Pages

AD

亚德诺

5 V Low Power, Slew-Rate Limited RS-485/RS-422 Transceiver

GENERAL DESCRIPTION The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus transmission lines. It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driv

文件：309.73 Kbytes 页数：16 Pages

AD

亚德诺

5 V Low Power, Slew-Rate Limited RS-485/RS-422 Transceiver

GENERAL DESCRIPTION The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus transmission lines. It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driv

文件：218.41 Kbytes 页数：16 Pages

AD

亚德诺

5 V Low Power, Slew-Rate Limited RS-485/RS-422 Transceiver

GENERAL DESCRIPTION The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus transmission lines. It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driv

文件：309.73 Kbytes 页数：16 Pages

AD

亚德诺

5 V Low Power, Slew-Rate Limited RS-485/RS-422 Transceiver

GENERAL DESCRIPTION The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus transmission lines. It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driv

文件：218.41 Kbytes 页数：16 Pages

AD

亚德诺