ADM3251E_V01中文资料亚德诺数据手册PDF规格书

GENERAL DESCRIPTION

The ADM3251E1 is a high speed, 2.5 kV fully isolated, single-channel RS-232/V.28 transceiver device that operates from a single 5 V power supply. Due to the high ESD protection on the RIN and TOUT pins, the device is ideally suited for operation in electrically harsh environments or where RS-232 cables are frequently being plugged and unplugged.

The ADM3251E incorporates dual-channel digital isolators with isoPower™ integrated, isolated power. There is no requirement to use a separate isolated dc-to-dc converter. Chip-scale trans-former iCoupler® technology from Analog Devices, Inc., is used both for the isolation of the logic signals as well as for the inte-grated dc-to-dc converter. The result is a total isolation solution.

The ADM3251E contains isoPower technology that uses high frequency switching elements to transfer power through the

transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. Refer to Application Note AN-0971, Control of Radiated Emissions with isoPower Devices, for details on board layout considerations.

The ADM3251E conforms to the EIA/TIA-232E and ITU-T V. 28 specifications and operates at data rates up to 460 kbps.

Four external 0.1 μF charge pump capacitors are used for the voltage doubler/inverter, permitting operation from a single 5 V supply.

The ADM3251E is available in a 20-lead, wide body SOIC package and is specified over the −40°C to +85°C temperature range.

FEATURES

2.5 kV fully isolated (power and data) RS-232 transceiver

isoPower integrated, isolated dc-to-dc converter

460 kbps data rate

1 Tx and 1 Rx

Meets EIA/TIA-232E specifications

ESD protection on RIN and TOUT pins

±8 kV: contact discharge

±15 kV: air gap discharge

0.1 μF charge pump capacitors

High common-mode transient immunity: >25 kV/μs

Safety and regulatory approvals

UL recognition

2500 V rms for 1 minute per UL 1577

VDE Certificate of Conformity

DIN EN 60747-5-2 (VDE 0884 Teil 2): 2003-01

CSA Component Acceptance Notice #5A

Operating temperature range: −40°C to +85°C

Wide body, 20-lead SOIC package

APPLICATIONS

High noise data communications

Industrial communications

General-purpose RS232 data links

Industrial/telecommunications diagnostic ports

Medical equipment