High Speed, Half-Duplex iCoupler Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

文件：294.01 Kbytes 页数：20 Pages

AD

亚德诺

High Speed, Half-Duplex iCoupler Isolated RS-485 Transceiver

FEATURES Half-duplex, isolated RS-485 transceiver PROFIBUS® compliant ANSI EIA/TIA 485-A and ISO 8482: 1987(E) compliant 20 Mbps data rate 5 V or 3 V operation (VDD1) High common-mode transient immunity: >25 kV/μs Isolated DE status output Receiver open-circuit, fail-safe design Thermal s

文件：449.72 Kbytes 页数：20 Pages

AD

亚德诺

Digital Isolator Product Selection and Resource Guide

文件：738.14 Kbytes 页数：4 Pages

AD

亚德诺

2.5 kV信号隔离、高速(20 Mbps)、半双工RS-485收发器

ADM2486差分总线收发器是一款集成式电流隔离器件，适用于多点总线传输线路的双向数据通信。它针对平衡传输线路而设计，符合ANSI EIA/TIA-485-A和ISO 8482:1987(E)标准。 \n\n 该器件采用ADI公司的iCoupler®技术，将三通道隔离器、三态差分线路驱动器和差分输入接收器集成于单封装中。器件逻辑端采用5 V或3 V电源供电，总线端则采用隔离式5 V电源供电。\n\n ADM2486驱动器具有高电平有效使能特性。驱动器差分输出与接收器差分输入内部相连，形成差分输入/输出端口；当驱动器禁用时，或者当VDD1或VDD2 = 0 V时，该端口向总线 • 半双工、隔离式RS-485收发器 \n\n• PROFIBUS®兼容 \n\n• 符合ANSI EIA/TIA 485-A与ISO 8482: 1987(E)标准 \n\n• 数据速率：20 Mbps \n\n• 5 V或3 V工作电压(VDD1) \n\n• 高共模瞬变抗扰度： >25 kV/μs \n\n• 隔离DE状态输出 \n\n• 接收器开路故障安全设计 \n\n• 热关断保护 \n\n• 总线支持50个节点 \n\n• 安全和法规认证\n• UL认证：—1分钟2500 Vrms，符合UL 1577标准\n\n• CSA元件验收通知#5A\n• IEC 609501 800 Vr;

ADI

亚德诺

High Speed, Half-Duplex iCoupler Isolated RS-485 Transceiver

FEATURES Half-duplex, isolated RS-485 transceiver PROFIBUS® compliant ANSI EIA/TIA 485-A and ISO 8482: 1987(E) compliant 20 Mbps data rate 5 V or 3 V operation (VDD1) High common-mode transient immunity: >25 kV/μs Isolated DE status output Receiver open-circuit, fail-safe design Thermal s

文件：449.72 Kbytes 页数：20 Pages

AD

亚德诺

High Speed, Half-Duplex iCoupler Isolated RS-485 Transceiver

FEATURES Half-duplex, isolated RS-485 transceiver PROFIBUS® compliant ANSI EIA/TIA 485-A and ISO 8482: 1987(E) compliant 20 Mbps data rate 5 V or 3 V operation (VDD1) High common-mode transient immunity: >25 kV/μs Isolated DE status output Receiver open-circuit, fail-safe design Thermal s

文件：449.72 Kbytes 页数：20 Pages

AD

亚德诺

High Speed, Half-Duplex iCoupler Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

文件：294.01 Kbytes 页数：20 Pages

AD

亚德诺

High Speed, Half-Duplex iCoupler Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

文件：294.01 Kbytes 页数：20 Pages

AD

亚德诺

High Speed, Half-Duplex iCoupler Isolated RS-485 Transceiver

FEATURES Half-duplex, isolated RS-485 transceiver PROFIBUS® compliant ANSI EIA/TIA 485-A and ISO 8482: 1987(E) compliant 20 Mbps data rate 5 V or 3 V operation (VDD1) High common-mode transient immunity: >25 kV/μs Isolated DE status output Receiver open-circuit, fail-safe design Thermal s

文件：449.72 Kbytes 页数：20 Pages

AD

亚德诺

High Speed, Half-Duplex iCoupler Isolated RS-485 Transceiver

FEATURES Half-duplex, isolated RS-485 transceiver PROFIBUS® compliant ANSI EIA/TIA 485-A and ISO 8482: 1987(E) compliant 20 Mbps data rate 5 V or 3 V operation (VDD1) High common-mode transient immunity: >25 kV/μs Isolated DE status output Receiver open-circuit, fail-safe design Thermal s

文件：449.72 Kbytes 页数：20 Pages

AD

亚德诺