Half-Duplex iCoupler-R Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

文件：489.31 Kbytes 页数：20 Pages

AD

亚德诺

Half-Duplex, iCoupler Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2483 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using the iCoupler technology fro

文件：401.44 Kbytes 页数：18 Pages

AD

亚德诺

Digital Isolator Product Selection and Resource Guide

文件：738.14 Kbytes 页数：4 Pages

AD

亚德诺

半双工、iCoupler隔离式RS-485收发器

ADM2483差分总线收发器是一款集成式电气隔离器件，设计用于平衡、多点总线传输线路的双向数据通信。它符合ANSI EIA/TIA-485-A和ISO 8482:1987(E)标准。该器件采用ADI公司的iCoupler技术，将3通道隔离器、三态差分线路驱动器和差分输入接收器集成于单封装中。器件逻辑端采用5 V或3 V电源供电，总线端则采用5 V电源供电。\n\n ADM2483压摆率受限以减小端接不当传输线路的反射。受控的压摆率将数据速率限制在500 kbps。该器件的输入阻抗为96 kΩ，允许总线上最多连接256个收发器。其驱动器具有高电平有效使能特性。驱动器差分输出与接收器差分 • 集成电气数据隔离的RS-485收发器 \n\n• 符合ANSI TIA/EIA RS-485-A和ISO 8482：1987(E)标准\n\n• 数据速率：500 kbps\n\n• 限摆率驱动器输出\n\n• 低功耗工作：2.5 mA最大值 \n\n• 适用的工作电压(VDD1)：5 V或3 V \n\n• 高共模瞬变抗扰度： >25 kV/μs\n\n• 真故障保护接收器输入\n\n• 无震颤上电/关断保护\n\n• 总线支持256个节点 \n\n• 热关断保护\n\n• 安全和法规认证\n• UL认证：1分钟2500 V rms，符合UL 1577\n\n• CSA元件验收通知5A\;

ADI

亚德诺

Half-Duplex, iCoupler Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2483 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using the iCoupler technology fro

文件：401.44 Kbytes 页数：18 Pages

AD

亚德诺

Half-Duplex iCoupler-R Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

文件：489.31 Kbytes 页数：20 Pages

AD

亚德诺

Half-Duplex, iCoupler Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2483 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using the iCoupler technology fro

文件：401.44 Kbytes 页数：18 Pages

AD

亚德诺

Half-Duplex, iCoupler Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2483 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using the iCoupler technology fro

文件：401.44 Kbytes 页数：18 Pages

AD

亚德诺

Half-Duplex iCoupler-R Isolated RS-485 Transceiver

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

文件：489.31 Kbytes 页数：20 Pages

AD

亚德诺

Half-Duplex, iCoupler Isolated RS-485 Transceiver

GENERAL DESCRIPTION The ADM2483 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using the iCoupler technology fro

文件：401.44 Kbytes 页数：18 Pages

AD

亚德诺