2.7 V to 16.5 V Hot Swap Controller with Current Sense Output

GENERAL DESCRIPTION The ADM1171 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An in

文件：255.25 Kbytes 页数：16 Pages

AD

亚德诺

2.7 V至16 V热插拔控制器，具有电流检测输出

ADM1171是一款热插拔控制器，能够将电路板安全地插入带电背板或拔出。这可通过具有电流控制环路的导通FET来实现，该环路利用一个检测电阻监控输入电流。内部电荷泵则用来增强外部高压侧N-沟道FET的栅极。当检测到过流状况时，FET的栅极电压会降低，以限制流经检测电阻的电流。ADM1171采用2.7 V至16.5 V电源供电。在过流情况下，由计时器电容决定FET保持此状况的时间长短。ON (ON/CLR)引脚为该器件提供使能输入，同时用作ADM1171-2型产品的锁存故障复位引脚。流经检测电阻的电流强度可以由CSOUT引脚上的电压决定。利用SS引脚，用户可以通过外部电容控制启动时电流斜升的软启动 • 能够将电路板安全地插入带电背板或拔出\n\n• 控制电源电压范围：2.7 V至16.5 V\n\n• 电流检测输出电压\n\n• 可调模拟电流限值，带断路器\n\n• 快速响应限制峰值故障电流;

ADI

亚德诺

2.7 V to 16.5 V Hot Swap Controller with Current Sense Output

GENERAL DESCRIPTION The ADM1171 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An in

文件：255.25 Kbytes 页数：16 Pages

AD

亚德诺

2.7 V to 16.5 V Hot Swap Controller with Current Sense Output

GENERAL DESCRIPTION The ADM1171 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An in

文件：255.25 Kbytes 页数：16 Pages

AD

亚德诺

2.7 V to 16.5 V Hot Swap Controller with Current Sense Output

文件：243.48 Kbytes 页数：16 Pages

AD

亚德诺

Package：SOT-23-8 薄型，TSOT-23-8；包装：卷带（TR） 类别：集成电路（IC） 热插拔控制器 描述：IC HOT SWAP CTRLR GP TSOT23-8

AD

亚德诺

Package：SOT-23-8 薄型，TSOT-23-8；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：集成电路（IC） 热插拔控制器 描述：IC HOT SWAP CTRLR GP TSOT23-8

AD

亚德诺