1.6 V to 16.5 V Hot Swap Controller with Soft Start

GENERAL DESCRIPTION The ADM1170 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An in

文件：266.77 Kbytes 页数：16 Pages

AD

亚德诺

1.6 V至16.5 V热插拔控制器

ADM1170是一款热插拔控制器，能够将电路板安全地插入带电背板或拔出。这可通过具有电流控制环路的导通FET来实现，该环路利用一个检测电阻监控输入电流。内部电荷泵则用来增强外部高压侧N-沟道FET的栅极。当检测到过流状况时，FET的栅极电压会降低，以限制流经检测电阻的电流。ADM1170采用2.7 V至16.5 V电源供电。采用 VCC的单独SENSE引脚时，ADM1170允许在最低至1.6 V的电源条件下热插拔。在过流情况下，由计时器电容决定FET保持此状况的时间长短。ON (ON/CLR)引脚为该器件提供使能输入，同时用作ADM1170-2型产品的锁存故障复位引脚。SS引脚以SS电容设置的 • 能够将电路板安全地插入带电背板或拔出\n\n• 电源电压范围：2.7 V至16.5V\n\n• 可调模拟电流限值，带断路器\n\n• 快速响应限制峰值故障电流，可保证电路板的安全\n\n• 控制电源电压范围：1.6 V至16.5 V;

ADI

亚德诺

1.6 V to 16.5 V Hot Swap Controller with Soft Start

GENERAL DESCRIPTION The ADM1170 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An in

文件：266.77 Kbytes 页数：16 Pages

AD

亚德诺

1.6 V to 16.5 V Hot Swap Controller with Soft Start

GENERAL DESCRIPTION The ADM1170 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An in

文件：266.77 Kbytes 页数：16 Pages

AD

亚德诺

1.6 V to 16.5 V Hot Swap Controller with Soft Start

文件：248.35 Kbytes 页数：16 Pages

AD

亚德诺

Package：SOT-23-8 薄型，TSOT-23-8；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：集成电路（IC） 热插拔控制器 描述：IC HOT SWAP CTRLR GP TSOT23-8

AD

亚德诺

Package：SOT-23-8 薄型，TSOT-23-8；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：集成电路（IC） 热插拔控制器 描述：IC HOT SWAP CTRLR GP TSOT23-8

AD

亚德诺