ADLT2852MPS-CSL中文资料亚德诺数据手册PDF规格书

GENERAL DESCRIPTION

The ADLT2852S-CSL is a low power, 20 Mbps RS485/RS422

transceiver operating on a 3.3 V supply. The receiver has a fail-safe

feature that guarantees a high output state under conditions of

floating or shorted inputs.

The driver maintains a high output impedance over the entire common-

mode range when disabled or when the supply is removed.

Excessive power dissipation caused by bus contention or a fault is

prevented by current limiting all outputs and by thermal shutdown.

Enhanced electrostatic discharge (ESD) protection allows this device

to withstand up to ±15 kV human body model (HBM) on the

transceiver interface pins without latch-up or damage.

The ADLT2852S-CSL is specified over the −55°C to +125°C temperature

range. Additional application and technical information can

be found in the Commercial Space Products Program brochure and

the LTC2852 data sheet.

FEATURES

► 3.3 V supply voltage

► 20 Mbps maximum data rate

► No damage or latch-up up to ±15 kV HBM

► Guaranteed fail-safe receiver operation over the entire commonmode

range

► Current-limited drivers and thermal shutdown

► Power-up and power-down glitch free driver outputs

► Low operating current: 370 μA typical in receive mode

► Compatible with TIA/EIA-485-A specifications

► Available in 14-lead SOIC_N package

COMMERCIAL SPACE FEATURES

► Supports aerospace applications

► Wafer diffusion lot traceability

► Radiation lot acceptance testing: TID

► Radiation benchmark

► Single event latch-up

APPLICATIONS

► Low Earth orbit (LEO) space payloads

► Low power RS485/RS422 transceiver

► Level translator

► Backplane transceiver