Wideband, 37 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 4:1 Mux/SP4T

GENERAL DESCRIPTION The ADG904 and ADG904-R are wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 Ω terminated shunt legs; the ADG904-R is a reflective mux. These devices are design

文件：354.01 Kbytes 页数：16 Pages

AD

亚德诺

宽带2.5 GHz、37 dB隔离(1 GHz)、CMOS 1.65 V至2.75 V、4:1多路复用器/SP4T

ADG904和ADG904-R均为采用CMOS工艺制造的宽带模拟4:1多路复用器，在最高至1 GHz范围内具有高隔离、低插入损耗特性。ADG904为吸收式/匹配多路复用器，具有50 Ω端接分流引脚；ADG904-R为反射式多路复用器。这些器件经过专门设计，在DC至1 GHz频率范围内具有高隔离特性。\n\n 根据3位二进制地址线A0、A1和EN所确定的地址，ADG904和ADG904-R将四路输入之一切换至公共输出RFC。当EN引脚为逻辑1时，该器件将被禁用。\n\n 二者均具有片内CMOS控制逻辑，无需外部控制电路。控制输入与CMOS和LVTTL均兼容。这些器件的功耗很低 • 宽带开关：-3 dB（2.5 GHz时）\n\n• 吸收式4:1复用/单刀四掷(SP4T)\n\n• 高关断隔离：37 dB（1 GHz时）\n\n• 低插入损耗（1.1 dB DC至1 GHz)\n\n• 1.65 V至2.75 V单电源供电\n\n• CMOS/LVTTL控制逻辑\n\n• 20引脚TSSOP和4 mm × 4 mm LFCSP封装\n\n• 低功耗：1 μA（最大值）\n\n• 通过汽车应用认证\n\n\nADG904-EP支持防务和航空航天应用（AQEC标准）\n• 下载ADG904-EP数据手册\n\n• 军用温度范围：-55°C至+125°C\n\n• 受控制造;

ADI

亚德诺

Wideband 2.5 GHz, 37 dB Isolation at 1 GHz, CMOS 1.65V to 2.75V, 4:1 Mux/SP4T

GENERAL DESCRIPTION The ADG904 and ADG904-R are wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 Ω terminated shunt legs; the ADG904-R is a reflective mux. These devices are design

文件：517.32 Kbytes 页数：17 Pages

AD

亚德诺

Wideband 2.5 GHz, 37 dB Isolation at 1 GHz, CMOS 1.65V to 2.75V, 4:1 Mux/SP4T

GENERAL DESCRIPTION The ADG904 and ADG904-R are wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 Ω terminated shunt legs; the ADG904-R is a reflective mux. These devices are design

文件：517.32 Kbytes 页数：17 Pages

AD

亚德诺

Wideband 2.5 GHz, 37 dB Isolation at 1 GHz, CMOS 1.65V to 2.75V, 4:1 Mux/SP4T

GENERAL DESCRIPTION The ADG904 and ADG904-R are wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 Ω terminated shunt legs; the ADG904-R is a reflective mux. These devices are design

文件：517.32 Kbytes 页数：17 Pages

AD

亚德诺

Wideband 2.5 GHz, 37 dB Isolation at 1 GHz, CMOS 1.65V to 2.75V, 4:1 Mux/SP4T

GENERAL DESCRIPTION The ADG904 and ADG904-R are wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 Ω terminated shunt legs; the ADG904-R is a reflective mux. These devices are design

文件：517.32 Kbytes 页数：17 Pages

AD

亚德诺

Wideband, 37 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 4:1 Mux/SP4T

GENERAL DESCRIPTION The ADG904 and ADG904-R are wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 Ω terminated shunt legs; the ADG904-R is a reflective mux. These devices are design

文件：354.01 Kbytes 页数：16 Pages

AD

亚德诺

Wideband, 37 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 4:1 Mux/SP4T

GENERAL DESCRIPTION The ADG904 and ADG904-R are wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 Ω terminated shunt legs; the ADG904-R is a reflective mux. These devices are design

文件：354.01 Kbytes 页数：16 Pages

AD

亚德诺

Wideband, 37 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 4:1 Mux/SP4T

GENERAL DESCRIPTION The ADG904 and ADG904-R are wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 Ω terminated shunt legs; the ADG904-R is a reflective mux. These devices are design

文件：354.01 Kbytes 页数：16 Pages

AD

亚德诺

Wideband, 37 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 4:1 Mux/SP4T

GENERAL DESCRIPTION The ADG904 and ADG904-R are wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 Ω terminated shunt legs; the ADG904-R is a reflective mux. These devices are design

文件：354.01 Kbytes 页数：16 Pages

AD

亚德诺