4/8 Channel Fault-Protected Analog Multiplexers

GENERAL DESCRIPTION The ADG508F, ADG509F and ADG528F are CMOS analog multiplexers, the ADG508F and ADG528F comprising eight single channels and the ADG509F comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, n-channel MOSFET s

文件：170.94 Kbytes 页数：12 Pages

AD

亚德诺

8-Channel/4-Channel Fault-Protected Analog Multiplexers

GENERAL DESCRIPTION The ADG508F and ADG509F are CMOS analog multiplexers, with the ADG508F comprising eight single channels and the ADG509F comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, n-channel MOSFET structure, both d

文件：288.67 Kbytes 页数：20 Pages

AD

亚德诺

8-Channel/4-Channel Fault-Protected Analog Multiplexers

GENERAL DESCRIPTION The ADG508F and ADG509F are CMOS analog multiplexers, with the ADG508F comprising eight single channels and the ADG509F comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, n-channel MOSFET structure, both d

文件：288.67 Kbytes 页数：20 Pages

AD

亚德诺

8-Channel/4-Channel Fault-Protected Analog Multiplexers

GENERAL DESCRIPTION The ADG508F and ADG509F are CMOS analog multiplexers, with the ADG508F comprising eight single channels and the ADG509F comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, n-channel MOSFET structure, both d

文件：288.67 Kbytes 页数：20 Pages

AD

亚德诺

4/8 Channel Fault-Protected Analog Multiplexers

GENERAL DESCRIPTION The ADG508F, ADG509F and ADG528F are CMOS analog multiplexers, the ADG508F and ADG528F comprising eight single channels and the ADG509F comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, n-channel MOSFET s

文件：170.94 Kbytes 页数：12 Pages

AD

亚德诺

8通道/4通道模拟多路复用器，具有故障保护功能

ADG508F和ADG509F均为CMOS模拟多路复用器；ADG508F内置8个单通道，ADG509F内置4个差分通道。这些多路复用器均可提供故障保护。这些器件采用串联n沟道、p沟道和n沟道MOSFET结构，发生过压或失电时，器件与信号源均会受到保护。该多路复用器可以承受-40 V至+55 V的连续过压输入。在断电故障条件下，多路复用器输入（或输出）表现为开路，泄漏电流只有几nA。这样，不但可以保护多路复用器及其所驱动的电路，而且可以保护驱动多路复用器的传感器或信号源。 \n\n ADG508F根据3位二进制地址线A0、A1和A2所确定的地址，将8路输入之一切换至公共输出。ADG5 • 电源关闭时所有开关断开 \n\n• 如果发生过压，开启通道的模拟输出将箝位在电源电压范围内。 \n\n• 防闩锁结构 \n\n• 低导通电阻：270Ω（典型值）;

ADI

亚德诺