ADC3910D065IRSMT中文资料德州仪器数据手册PDF规格书

1 Features

• Sampling rate up to 125MSPS

• Latency: 1 clock cycle

• Low power (2 channel):

– 92mW at 125MSPS

– 59mW at 25MSPS

– 4mW in PD mode

• Small footprint: 32-VQFN (4mm x 4mm)

• Single or dual channel ADC

• Dual digital comparators

• Reference: internal or external

• No missing codes, ±1 LSB INL

• Buffered, differential or single ended inputs

• Input bandwidth: 150MHz (3-dB)

• Single 1.8V supply

– Optional 3.3VIO capability

• Industrial temperature range: -40 to 105°C

• On-chip digital filter (optional)

– Decimation by 2, 4, 8, 16

• Parallel (SDR, DDR) and serial CMOS interface

• Spectral performance (fIN = 5MHz):

– SNR: 61dBFS

– SFDR: 65dBc

2 Applications

• Radio receiver

• LiDAR

• Low latency control loops

• Laser scanners

• Global positioning systems

• Source measure unit

• Detection equipment

3 Description

The ADC3910Dx and ADC3910Sx are a family ultralow

power 10-bit 125MSPS high-speed single and

dual channel analog-to-digital converters. High-speed

control loops benefit from the short latency of only

1 clock cycle. The ADC consumes only 92mW at

125Msps with a power consumption that scales with

lower sampling rates.

The device uses DDR, HDDR, SDR or serial CMOS

interface to output the data from +1.8V to +3.3V

to accommodate various receiver requirements. The

device implements analog monitoring function by

event triggered interrupts per channel using a

digital comparator with programmable high and low

thresholds, hysteresis, and event counter. The device

is a pin-to-pin compatible family of ADCs with 8

and 10-bit resolution and different speed grades. The

device is available in a 32-pin VQFN package, and

supports industrial temperature range from -40 to

+105°C.