ADC12DL040CIVSSLASHNOPB中文资料德州仪器数据手册PDF规格书

1FEATURES

23• Single +3.0V Supply Operation

• Internal Sample-and-Hold

• Internal Reference

• Outputs 2.4V to 3.6V Compatible

• Power Down Mode

• Duty Cycle Stabilizer

• Multiplexed Output Mode

APPLICATIONS

• Ultrasound and Imaging

• Instrumentation

• Communications Receivers

• Sonar/Radar

• xDSL

• Cable Modems

• DSP Front Ends

KEY SPECIFICATIONS

• Resolution 12 Bits

• DNL ±0.3 LSB (typ)

• SNR (fIN = 10 MHz) 69 dB (typ)

• SFDR (fIN = 10 MHz) 85 dB (typ)

• Data Latency 7 Clock Cycles

• Power Consumption

– Operating 210 mW (typ)

– Power Down Mode 36 mW (typ)

DESCRIPTION

The ADC12DL040 is a dual, low power monolithic

CMOS analog-to-digital converter capable of

converting analog input signals into 12-bit digital

words at 40 Megasamples per second (MSPS). This

converter uses a differential, pipeline architecture with

digital error correction and an on-chip sample-and- hold circuit to minimize power consumption while

providing excellent dynamic performance and a 250

MHz Full Power Bandwidth. Operating on a single

3.0V power supply, the ADC12DL040 achieves 11.1

effective bits at nyquist and consumes just 210 mW

at 40 MSPS, including the reference current. The

Power Down feature reduces power consumption to

36 mW.

The differential inputs provide a full scale differential

input swing equal to 2 times VREF with the possibility

of a single-ended input. Full use of the differential

input is recommended for optimum performance. The

digital outputs from the two ADC's are available on a

single multiplexed 12-bit bus or on separate buses.

Duty cycle stabilization and output data format are

selectable using a quad state function pin. The output

data can be set for offset binary or two's complement.

To ease interfacing to lower voltage systems, the digital output driver power pins of the ADC12DL040

can be connected to a separate supply voltage in the

range of 2.4V to the analog supply voltage.

This device is available in the 64-lead TQFP package

and will operate over the industrial temperature range

of −40°C to +85°C. An evaluation board is available to ease the evaluation process.