ADC102S021集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

ADC102S021属于集成电路（IC）的模数转换器（ADC）。由德州仪器制造生产的ADC102S021模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

1FEATURES

2• Specified Over a Range of Sample Rates

• Two Input Channels

• Variable Power Management

• Single power supply with 2.7V - 5.25V range

APPLICATIONS

• Portable Systems

• Remote Data Acquisition

• Instrumentation and Control Systems

KEY SPECIFICATIONS

• DNL: +0.9 / −0.6 LSB (typ)

• INL: ±0.64 LSB (typ)

• SNR: 72.4 dB (typ)

• Power Consumption

– 3V Supply: 4.3 mW (typ)

– 5V Supply: 13.1 mW (typ)

DESCRIPTION

The ADC122S101 is a low-power, two-channel

CMOS 12-bit analog-to-digital converter with a high-

speed serial interface. Unlike the conventional

practice of specifying performance at a single sample

rate only, the ADC122S101 is fully specified over a

sample rate range of 500 ksps to 1 Msps. The

converter is based on a successive-approximation

register architecture with an internal track-and-hold

circuit. It can be configured to accept one or two input

signals at inputs IN1 and IN2.

The output serial data is straight binary, and is

compatible with several standards, such as SPI™,

QSPI™, MICROWIRE, and many common DSP

serial interfaces.

The ADC122S101 operates with a single supply that

can range from +2.7V to +5.25V. Normal power

consumption using a +3V or +5V supply is 4.3 mW

and 13.1 mW, respectively. The power-down feature

reduces the power consumption to just 0.14 μW using

a +3V supply, or 0.32 μW using a +5V supply.

The ADC122S101 is available in an 8-lead VSSOP

package. Operation over the industrial temperature

range of −40°C to +85°C is ensured.