ADC10080CIMT/NOPB集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

ADC10080CIMT/NOPB属于集成电路（IC）的模数转换器（ADC）。由德州仪器制造生产的ADC10080CIMT/NOPB模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

FEATURES

• Single +3.0V Operation

• Selectable Full-Scale Input Swing

• 400 MHz −3 dB Input Bandwidth(1)

• Low Power Consumption

• Standby Mode

• On-Chip Reference and Sample-and-Hold

Amplifier sample•

Offset Binary or Two’s Complement Data

Format

• Separate Adjustable Output Driver Supply

KEY SPECIFICATIONS

• Resolution: 10 Bits

• Conversion Rate: 80 MSPS

• Full Power Bandwidth: 400 MHz

• DNL: ±0.25 LSB (typ)

• SNR (fIN = 10 MHz): 59.5 dB (typ)

• SFDR (fIN = 10 MHz): −78.7 dB (typ)

• Power Consumption, 80 Msps: 78.6 mW

APPLICATIONS

• Ultrasound and Imaging

• Instrumentation

• Cellular Base Stations/Communications

Receivers

• Sonar/Radar

• xDSL

• Wireless Local Loops

• Data Acquisition Systems

• DSP Front Ends

DESCRIPTION

The ADC10080 is a monolithic CMOS analog-to-

digital converter capable of converting analog input

signals into 10-bit digital words at 80 Megasamples

per second (MSPS). This converter uses a

differential, pipeline architecture with digital error

correction and an on-chip sample-and-hold circuit to provide a complete conversion solution and to

minimize power consumption, while providing

excellent dynamic performance. A unique sample•

and-hold stage yields a full-power bandwidth of 400

MHz. Operating on a single 3.0V power supply, this

device consumes just 78.6 mW at 80 MSPS,

including the reference current. The Standby feature

reduces power consumption to just 15 mW.

The differential inputs provide a full scale selectable

input swing of 2.0 VP-P, 1.5 VP-P, 1.0 VP-P, with the

possibility of a single-ended input. Full use of the

differential input is recommended for optimum

performance. An internal +1.2V precision bandgap

reference is used to set the ADC full-scale range, and

also allows the user to supply a buffered referenced

voltage for those applications requiring increased

accuracy. The output data format is user choice of

offset binary or two’s complement.

This device is available in the 28-lead TSSOP

package and will operate over the industrial

temperature range of −40°C to +85°C.