ADC10040Q集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

1FEATURES

2• Single +3.0V Operation

• Selectable 2.0 VP-P, 1.5 VP-P, or 1.0 VP-P full-

scale input swing

• 400 MHz −3 dB Input Bandwidth

• Low Power Consumption

• Standby Mode

• On-Chip Reference and Sample-and-Hold

Amplifier

• Offset Binary or Two’s Complement Data

Format

• Separate Adjustable Output Driver Supply to

Accommodate 2.5V and 3.3V Logic Families

• AEC-Q100 Grade 3 Qualified

• 28-Pin TSSOP Package

KEY SPECIFICATIONS

• Resolution: 10 Bits

• Conversion Rate: 40 MSPS

• Full Power Bandwidth: 400 MHz

• DNL: ±0.3 LSB typ)

• SNR (fIN = 11 MHz): 59.6 dB (typ)

• SFDR (f IN = 11 MHz): -80 dB (typ)

• Power Consumption, 40 MHz: 55.5 mW

APPLICATIONS

• Ultrasound and Imaging

• Instrumentation

• Cellular Base Stations/Communications

Receivers

• Sonar/Radar

• xDSL

• Wireless Local Loops

• Data Acquisition Systems

• DSP Front Ends

DESCRIPTION

The ADC10040 is a monolithic CMOS analog-to-

digital converter capable of converting analog input

signals into 10-bit digital words at 40 Megasamples

per second (MSPS). This converter uses a

differential, pipeline architecture with digital error

correction and an on-chip sample-and-hold circuit to

provide a complete conversion solution, and to

minimize power consumption, while providing

excellent dynamic performance. A unique sample-

and-hold stage yields a full-power bandwidth of 400

MHz. Operating on a single 3.0V power supply, this

device consumes just 55.5 mW at 40 MSPS,

including the reference current. The Standby feature

reduces power consumption to just 13.5 mW.

The differential inputs provide a full scale selectable

input swing of 2.0 VP-P, 1.5 VP-P, 1.0 VP-P, with the

possibility of a single-ended input. Full use of the

differential input is recommended for optimum

performance. An internal +1.2V precision bandgap

reference is used to set the ADC full-scale range, and also allows the user to supply a buffered referenced

voltage for those applications requiring increased

accuracy. The output data format is user choice of

offset binary or two’s complement.

The ADC10040Q runs on an Automotive Grade Flow

and is AEC-Q100 Grade 3 Qualified.

This device is available in the 28-lead TSSOP

package and will operate over the industrial

temperature range of −40°C to +85°C.