10 MHz, 14.5 nV/√Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

FEATURES Power supply rejection ratio (PSRR): 98 dB minimum Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V Dual-supply operation: ±1.35 V to ±2.75 V Wide bandwidth: 10 MHz Rail-to-rail input and output Low noise 2 μV p-p

文件：1.22875 Mbytes 页数：24 Pages

AD

亚德诺

8.7MHz, 15nV/?숰z, Rail-to-Rail I/O

文件：314.47 Kbytes 页数：4 Pages

AD

亚德诺

10MHZ、14.5NV/√HZ、RRIO、零输入交越失真双通道运算放大器

ADA4500-2是一款双通道、10 MHz、14.5 nV/√Hz、低功耗放大器，具有轨到轨输入和输出摆幅，可采用2.7 V至5.5 V单电源工作，并与业界标准标称电压+3.0 V、+3.3 V、+5.0 V和±2.5 V兼容。\n\n 该放大器采用新颖的零交越失真电路拓扑结构，能够在整个轨到轨输入共模范围内提供高线性度，并具有出色的电源抑制比(PSRR)和共模抑制比(CMRR)性能，而不会像传统互补轨到轨输入级那样出现交越失真。所得到的运算放大器还具有出色的精度、宽带宽和极低偏置电流。\n\n 这种特性组合使ADA4500-2成为精密传感器应用的理想选择，因为它可以将电 • 轨到轨输入和输出\n\n• 电源抑制比(PSRR)：98dB（最小值）\n\n• 共模抑制比(CMRR)：95 dB（最小值） \n\n• 失调电压：120 μV（最大值）\n\n• 单电源供电：\n2.7 V至5.5 V\n\n• 双电源供电：\n±1.35 V至±2.75 V\n\n• 宽带宽：10 MHz\n\n• 低噪声\n- 2 μV p-p（0.1 Hz至10 Hz）\n- 14.5nV/√Hz（1kHz时） \n\n• 低输入偏置电流：2 pA（最大值）;

ADI

亚德诺

10 MHz, 14.5 nV/√Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

FEATURES Power supply rejection ratio (PSRR): 98 dB minimum Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V Dual-supply operation: ±1.35 V to ±2.75 V Wide bandwidth: 10 MHz Rail-to-rail input and output Low noise 2 μV p-p

文件：1.22875 Mbytes 页数：24 Pages

AD

亚德诺

丝印：A2Z；Package：LFCSP；10 MHz, 14.5 nV/√Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

FEATURES Power supply rejection ratio (PSRR): 98 dB minimum Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V Dual-supply operation: ±1.35 V to ±2.75 V Wide bandwidth: 10 MHz Rail-to-rail input and output Low noise 2 μV p-p

文件：1.22875 Mbytes 页数：24 Pages

AD

亚德诺

丝印：A2Z；Package：LFCSP；10 MHz, 14.5 nV/√Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

FEATURES Power supply rejection ratio (PSRR): 98 dB minimum Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V Dual-supply operation: ±1.35 V to ±2.75 V Wide bandwidth: 10 MHz Rail-to-rail input and output Low noise 2 μV p-p

文件：1.22875 Mbytes 页数：24 Pages

AD

亚德诺

丝印：A2Z；Package：MSOP；10 MHz, 14.5 nV/√Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

FEATURES Power supply rejection ratio (PSRR): 98 dB minimum Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V Dual-supply operation: ±1.35 V to ±2.75 V Wide bandwidth: 10 MHz Rail-to-rail input and output Low noise 2 μV p-p

文件：1.22875 Mbytes 页数：24 Pages

AD

亚德诺

丝印：A2Z；Package：MSOP；10 MHz, 14.5 nV/√Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

FEATURES Power supply rejection ratio (PSRR): 98 dB minimum Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V Dual-supply operation: ±1.35 V to ±2.75 V Wide bandwidth: 10 MHz Rail-to-rail input and output Low noise 2 μV p-p

文件：1.22875 Mbytes 页数：24 Pages

AD

亚德诺

丝印：A2Z；Package：MSOP；10 MHz, 14.5 nV/√Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

FEATURES Power supply rejection ratio (PSRR): 98 dB minimum Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V Dual-supply operation: ±1.35 V to ±2.75 V Wide bandwidth: 10 MHz Rail-to-rail input and output Low noise 2 μV p-p

文件：1.22875 Mbytes 页数：24 Pages

AD

亚德诺

10 MHz, 14.5 nV/?숰z, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

文件：1.041089 Mbytes 页数：24 Pages

AD

亚德诺