AD9834BRUZ集成电路（IC）的直接数字合成（DDS）规格书PDF中文资料

AD9834BRUZ属于集成电路（IC）的直接数字合成（DDS）。由亚德诺半导体技术有限公司制造生产的AD9834BRUZ直接数字合成（DDS）直接数字合成 (DDS) 用于由数字信号生成不同频率的模拟波形。在必须大范围扫描的无线系统中可用于频率控制。主时钟频率有 5MHz、16MHz、16.776MHz、25MHz、50MHz、75MHz、125MHz、180MHz、200MHz、250MHz、300MHz、400MHz、500MHz、1GHz、2.5GHz 和 3GHz，分辨率为 10 b、12 b 或 14 b。

GENERAL DESCRIPTION

The AD9834 is a 75 MHz low power DDS device capable of producing high performance sine and triangular outputs. It also has an on-board comparator that allows a square wave to be produced for clock generation. Consuming only 20 mW of power at 3 V makes the AD9834 an ideal candidate for power-sensitive applications.

Capability for phase modulation and frequency modulation is provided. The frequency registers are 28 bits; with a 75 MHz clock rate, resolution of 0.28 Hz can be achieved. Similarly, with a 1 MHz clock rate, the AD9834 can be tuned to 0.004 Hz resolution. Frequency and phase modulation are affected by loading registers through the serial interface and toggling the registers using software or the FSELECT pin and PSELECT pin, respectively. The AD9834 is written to using a 3-wire serial interface. This serial interface operates at clock rates up to 40 MHz and is compatible with DSP and microcontroller standards.

The device operates with a power supply from 2.3 V to 5.5 V. The analog and digital sections are independent and can be run from different power supplies, for example, AVDD can equal 5 V with DVDD equal to 3 V.

The AD9834 has a power-down pin (SLEEP) that allows external control of the power-down mode. Sections of the device that are not being used can be powered down to minimize the current consumption. For example, the DAC can be powered down when a clock output is being generated.

FEATURES

Narrow-band SFDR >72 dB

2.3 V to 5.5 V power supply

Output frequency up to 37.5 MHz

Sine output/triangular output

On-board comparator

3-wire SPI® interface

Extended temperature range: −40°C to +105°C

Power-down option

20 mW power consumption at 3 V

20-lead TSSOP

APPLICATIONS

Frequency stimulus/waveform generation

Frequency phase tuning and modulation

Low power RF/communications systems

Liquid and gas flow measurement

Sensory applications: proximity, motion, and defect detection

Test and medical equipment