AD9433BSVZ-125集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

AD9433BSVZ-125属于集成电路（IC）的模数转换器（ADC）。由亚德诺半导体技术有限公司制造生产的AD9433BSVZ-125模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

GENERAL INTRODUCTION

The AD9433 is a 12-bit, monolithic sampling analog-to-digital converter (ADC) with an on-chip track-and-hold circuit and is designed for ease of use. The product operates up to a 125 MSPS conversion rate and is optimized for outstanding dynamic performance in wideband and high IF carrier systems.

FEATURES

IF sampling up to 350 MHz

SNR: 67.5 dB, fIN up to Nyquist at 105 MSPS

SFDR: 83 dBc, fIN = 70 MHz at 105 MSPS

SFDR: 72 dBc, fIN = 150 MHz at 105 MSPS

2 V p-p analog input range

On-chip clock duty cycle stabilization

On-chip reference and track-and-hold

SFDR optimization circuit

Excellent linearity

DNL: ±0.25 LSB (typical)

INL: ±0.5 LSB (typical)

750 MHz full power analog bandwidth

Power dissipation: 1.35 W (typical) at 125 MSPS

Twos complement or offset binary data format

5.0 V analog supply operation

2.5 V to 3.3 V TTL/CMOS outputs

APPLICATIONS

Cellular infrastructure communication systems

3G single- and multicarrier receivers

IF sampling schemes

Wideband carrier frequency systems

Point-to-point radios

LMDS, wireless broadband

MMDS base station units

Cable reverse path

Communications test equipment

Radar and satellite ground systems